Quasar XR Module Discovery and Configuration

Module Discovery and Configuration

Each fader module on the Quasar Surface has a unique IP address to permit configuration via the web GUI. Begin by launching a web browser and entering the IP address of the MTS, then click on the Console Discovery menu. When prompted for authentication, enter "user" for the user name and leave the password field blank.

Figure 1- Main status page

All connected fader modules will be listed along with their MAC Address and IP Address. If the pre-assigned IP addresses don't fit into your network scheme, you can change them here by selecting a module's radio button, entering the new IP address, and clicking the "Do It!" button.

Figure 2 - Console discovery page

Once all modules have been set, check the access to each fader by entering its IP address in your browser, or by clicking directly on each of the addresses listed in the Console Discovery menu.