V-Mixer Control GPIO Table
This remote control only applies to control of the V-mixer found in the iQ series, Radius, RaQ, and DesQ consoles.
Select the following V-Mixer control modes from the web configuration page of your console.
Disabled: No remote control of the V-Mixer
Normal: Latch to turn ON
Toggle: Momentary for ON/OFF
Radio: Last momentary is ON, all others OFF
Inputs (GPI)
ID | Name | Pin |
GPI 1 | In 1 ON command | Pin 11 |
GPI 2 | In 2 ON command | Pin 12 |
GPI 3 | In 3 ON command | Pin 13 |
GPI 4 | In 4 ON command | Pin 14 |
GPI 5 | In 5 ON command | Pin 15 |
Outputs (GPO)
ID | Name | Pin | Notes |
GPO 1 | In 1 ON lamp | Pin 1 | Active when ON |
GPO 2 | In 2 ON lamp | Pin 2 | Active when ON |
GPO 3 | In 3 ON lamp | Pin 3 | Active when ON |
GPO 4 | In 4 ON lamp | Pin 4 | Active when ON |
GPO 5 | In 5 ON lamp | Pin 5 | Active when ON |