--- title: "Axia GPIO for V-Mixer (iQ, Radius, RaQ, and DesQ series consoles only)" slug: "axia-gpio-for-v-mixer-iq-radius-raq-and-desq-series-consoles-only" updated: 2024-12-16T10:50:11Z published: 2024-12-16T10:50:11Z canonical: "docs.telosalliance.com/axia-gpio-for-v-mixer-iq-radius-raq-and-desq-series-consoles-only" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt > Use this file to discover all available pages before exploring further. # Axia GPIO for V-Mixer (iQ, Radius, RaQ, and DesQ series consoles only) ## V-Mixer Control GPIO Table > [!WARNING] > This remote control only applies to control of the V-mixer found in the iQ series, Radius, RaQ, and DesQ consoles. Select the following V-Mixer control modes from the web configuration page of your console. - **Disabled:** No remote control of the V-Mixer - **Normal:** Latch to turn ON - **Toggle:** Momentary for ON/OFF - **Radio:** Last momentary is ON, all others OFF Inputs (GPI) | ID | Name | Pin | | --- | --- | --- | | GPI 1 | In 1 ON command | Pin 11 | | GPI 2 | In 2 ON command | Pin 12 | | GPI 3 | In 3 ON command | Pin 13 | | GPI 4 | In 4 ON command | Pin 14 | | GPI 5 | In 5 ON command | Pin 15 | #### Outputs (GPO) | #### ID | #### Name | #### Pin | #### Notes | | --- | --- | --- | --- | | GPO 1 | In 1 ON lamp | Pin 1 | Active when ON | | GPO 2 | In 2 ON lamp | Pin 2 | Active when ON | | GPO 3 | In 3 ON lamp | Pin 3 | Active when ON | | GPO 4 | In 4 ON lamp | Pin 4 | Active when ON | | GPO 5 | In 5 ON lamp | Pin 5 | Active when ON |