---
title: "Changing Omnia-3 Passwords"
slug: "changing-omnia-3-passwords"
updated: 2024-12-17T13:32:07Z
published: 2024-12-17T13:32:07Z
canonical: "docs.telosalliance.com/changing-omnia-3-passwords"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Changing Omnia-3 Passwords

### Scope

This document applies to the legacy Omnia-3 processor and explains how to change the passwords for both **Normal mode** and **Engineer mode**.

### The Process

The default passwords supplied with the unit are "vito" (all lower case) for **Normal mode** and "tomtom" (all lower case) for **Engineer mode**.

From the **Utility** menu on the front panel, select the **Security** submenu.

To change the *Normal mode* password, select **Lock Password**. To change the *Engineer mode* password, select **Engineer Password**.

To change the password, use the standard click and turn of the jog-wheel to select the character position you wish to change and to select the character for that position.

After choosing a new password, continue rotating the jog wheel until **OK** is highlighted. Push on the jog wheel to save the new password.

If you wish to cancel this operation, just scroll onto the **Cancel** box and press the jog wheel. This will cancel the password change.

> [!WARNING]
> Do not attempt to assign the same password to both security levels! You will lock yourself out permanently!

### Let us know how we can help

If you have further questions on this topic or have ideas about improving this document, please [contact us](https://www.telosalliance.com/support-request).