---
title: "Completing Network Configuration"
slug: "completing-network-configuration"
updated: 2024-11-11T08:16:43Z
published: 2024-11-11T08:16:43Z
canonical: "docs.telosalliance.com/completing-network-configuration"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Completing Network Configuration

From the left side menu, choose **Network** under the **Configuration** heading. The current settings for the Livewire (LAN) and WAN interfaces are displayed.

### Configuring the Livewire (LAN) Interface (1)

- Set the Network address
- Set the Netmask

Note that the Livewire interface does not require or support a Gateway or DNS.

### Configuring the WAN Interface (2)

- Set Network Address A
- Set Netmask A
- Set Gateway A
- Check the "Enable Configuration Access from WAN" if desired (3)
- Click "Apply", then answer "Yes" to allow the system to restart

> [!NOTE]
> **Note -** Using the "B" network configuration is an advanced topic covered in detail in the User Manual.

![Livewire (LAN) and WAN interface configuration](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/image(33)(1)(1)(1)(1)(1)(1)(1)(1)(1)(1).png)

Livewire (LAN) and WAN interface configuration