Overview
This article explains how to connect a Quasar MTS module to an Infinity Intercom Panel over the network.
Once the connection is established, the MTS displays the buttons assigned to the Infinity Panel and allows the operator to control the panel's Talk and Listen functions directly from the MTS.
Prerequisites
Before beginning, ensure that:
The Quasar MTS and Infinity Intercom Panel are connected to the same network.
You know the IP address of the Quasar MTS.
You know the IP address of the Infinity Intercom Panel you want to control.
Configure the MTS
1. Log in to the MTS
Open a web browser and navigate to the IP address of the Quasar MTS.
Sign in to the device.
2. Open Intercom Control
Navigate to the Intercom Control tab.
3. Enter the Infinity Panel IP Address
Enter the IP address of the Infinity Intercom Panel you want the MTS to control.
4. Apply the Configuration
Select Apply to save the configuration.
At this point, the MTS should be configured to communicate with the specified Infinity Panel.
Verify the Connection
Once the connection is established across the network, the MTS will display the buttons assigned to the Infinity Intercom Panel.
The MTS interface should now show the available controls for the connected panel.
Control the Infinity Panel from the MTS
From the MTS interface, you can select the available Talk and Listen buttons.
These controls allow you to engage the corresponding Infinity Panel functions directly from the MTS.
Troubleshooting
If the Infinity Panel buttons do not appear on the MTS:
Verify that the Infinity Panel's IP address was entered correctly.
Confirm that the MTS and Infinity Panel have network connectivity.
Verify that the configuration was saved by selecting Apply.
Confirm that the Infinity Panel has buttons assigned and configured.
If the connection is established but the expected controls are not displayed, verify the Infinity Panel configuration.