Scope
This document applies to changing the DSP Core style of the Omnia VOLT.
Description
The hardware of all Omnia VOLT units is the same. Any Omnia VOLT can run any of the four available DSP Core styles: FM, AM, HD/Pro, and SG.
The VOLT has two onboard software banks. If there's a style you use only occasionally, or want to keep one ready for backup use, you can keep that style loaded in the software bank that is not normally run and then boot into it when needed. 👍
Setup
The procedure to change DSP Core styles is the same as a software update.
Download the desired update file from our Omnia VOLT Webpage. Look to the right under the "Software" heading.
Then follow the Software Update Instructions starting with Step 2.
When ready, select the software bank with the new style and reboot.
Be sure to load fresh IO and processing preset defaults once you bring up the new Core type. This will ensure the proper defaults are loaded for the new style.
Let us know how we can help
If you have further questions on this topic or have ideas about improving this document please contact us.