---
title: "Create Livewire output with \"Processed\" Program 1 audio"
slug: "create-livewire-output-with-processed-program-1-audio"
updated: 2024-12-13T10:05:40Z
published: 2024-12-13T10:05:40Z
canonical: "docs.telosalliance.com/create-livewire-output-with-processed-program-1-audio"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Create Livewire output with "Processed" Program 1 audio

## Scope

Axia Studio Engine (v2.5x and higher) and Axia Quasar Engine are equipped with the capability to deliver Omnia 3 style processing for monitoring paths, including headphone feeds and monitor feeds.

When the integrated headphone processing is configured as "Program 1 in all monitoring paths", it opens up the opportunity to establish a new Livewire channel. This channel is essentially the Program 1 bus, with Omnia 3 processing applied to it.

This help document aims to guide the reader through the process of configuring the engine to generate a new Livewire channel featuring Program 1 processed audio.

### About"Integrated Omnia Processing"

A short aside on how the Integrated Omnia Processing works:

By default the feature is disabled. If not already using the feature you would need to configure it first

- *In Axia Studio Engine and Powerstation* web ui, the settings can be accessed from the "Prog and mon out" page, look for " Integrated Omnia Processing" at the bottom of the page.
- *In Axia Quasar Engine* web ui, the settings can be accessed from the "Program & Monitor outs" page, look for " Integrated Omnia Processing" at the bottom of the page.

To enable the feature, you need to select the "Process" mode as "Program 1 in all monitoring paths, and a preset:

- >>**Mode "Program 1 in all monitoring paths"** : *Any* monitor path that brings up PGM1 will hear it with the Omnia processing applied. Examples: Control Room monitor with PGM1 selected, Control Room headphone with PGM1 selected, Studio Monitor (Studio Talent + Studio Guest HP) with PGM1 selected. Any generated "individual headphone" backfeeds where PGM1 is the selected as the monitor source
- **Mode "CR headphones for any selection"** : *Only* the Control Room Headphone monitor feed will get Omnia processing applied. However, it will get applied to ANY selection you make (PGM1,2,3,4, EXT1, EXT2)

### Step by Step

1. Go to the Prog and Mon Out/Program & Monitor outs page

Enable Integrated Omnia Processing. Select process mode "Program 1 in all monitoring paths" and select a headphone preset

> [!WARNING]
> Note, this **will** change how Program 1 sounds in the monitoring paths, however this must be set if you want to create a unique Program 1 processed audio channel

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/d49bc525-d121-47f0-b340-053b31cb1748-image.png?sv=2026-02-06&spr=https&st=2026-11-12T13%3A11%3A22Z&se=2026-11-12T14%3A11%3A22Z&sr=c&sp=r&sig=Jj8JT%2B3G3astvFezyr42PfLYkHXrty0K7IZtws11zcQ%3D)

1. Go to the V-MIXER page

+ Find an unused VMIX INPUT and set the Input Selector to PGM 1 PROC.

+ Set the input to be ON

+ Set a friendly name for the direct output of the input "ST 3 PGM1 Proc"

+ Set a unique Livewire channel number to send the audio on

+ Set the Mode to Standard Stereo (Live Stereo usually not required for this use)

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/a01fddd3-3b7c-418a-9798-5139cc5e2a11-image.png?sv=2026-02-06&spr=https&st=2026-11-12T13%3A11%3A22Z&se=2026-11-12T14%3A11%3A22Z&sr=c&sp=r&sig=Jj8JT%2B3G3astvFezyr42PfLYkHXrty0K7IZtws11zcQ%3D)

The Output should give OK status, and a Green or Yellow box to indicate audio level.

### That's it

Based on the example above, you now have created Livewire channel 211 which will contain Program 1 processed audio

The original Program 1 channel will remain the same, untouched

The Control Room Monitors, Headphones, Studio Monitor or individual headphone mixes that monitor Program 1 will get the processed audio instead of the raw Program 1

### Let us know how we can help

If you have further questions on this topic or have ideas about how we can improve this document, please [contact us](https://www.telosalliance.com/support-request).