---
title: "Enable or Disable the SNMP service on iPort High Density"
slug: "enable-or-disable-the-snmp-service-on-iport-high-density"
updated: 2024-12-19T08:48:32Z
published: 2024-12-19T08:48:32Z
canonical: "docs.telosalliance.com/enable-or-disable-the-snmp-service-on-iport-high-density"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Enable or Disable the SNMP service on iPort High Density

## Scope

This document covers steps to enable or disable the SNMP service on the iPort High Density or iPort High Density + Content Delay.

## Description

Some users may choose to disable the SNMP service on the iPort High Density. Most often, this is for security reasons when the service is not required or does not meet certain other criteria.

> [!WARNING]
> Note that this is only for the iPort High Density and the iPort High Density + Content delay. Previous iPort offerings like the iPort PLUS do not have this option.
> 
> Additionally, a minimum version of 3.1.0-12 is required. Please [follow this link](/v1/docs/installing-iport-high-density-update-version-310) if your unit requires an update.

The SNMP service in iPort High Density is **ENABLED** by default.

## Disabling the SNMP Service

1. From the main Web Page of your iPort High Density, click on the **Logging** link found under the Diagnostics heading on the left side menu.
2. Under the SNMP Configuration heading, click and REMOVE the check box next to the **Enable SNMP Service**.
3. Click the **Apply** button. Take care to click the Apply button in the SNMP Configuration section. Clicking Apply in a different section will discard any changes you have made to the SNMP Configuration.

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/c0041b2a-990e-47e5-be43-5f864905b77b-image.png)

> [!WARNING]
> The **Target network manager IP** and **Target network manager port** are greyed out when the SNMP service is disabled.

## Enabling the SNMP Service

The SNMP Service on the iPort High Density is enabled by default. If you have disabled the service and need to enable it, repeat the steps above and make sure the Enable SNMP Service box is checked.

With the SNMP service enabled, you can specify the SNMP Manager IP address and port.

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/8cb04e95-5028-4a8e-ae1e-9c77b12535e1-image.png)

## Let us know how we can help

If you have further questions or have ideas about improving this document, please [contact us](https://www.telosalliance.com/support-request).