---
title: "Factory Default Settings"
slug: "factory-default-settings"
updated: 2024-10-22T12:48:11Z
published: 2024-10-22T12:48:11Z
canonical: "docs.telosalliance.com/factory-default-settings"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Factory Default Settings

The following are the Factory Default Settings for the SETTINGS, OPTIONS, and Internal Telephone Network/Call Progress Tone Detection (CPTD) DIP switches. They will work in most cases, but should be considered a “starting point."

### **SETTINGS**

|  | Bit 1 | Bit 2 | Bit 3 | Bit 4 | Bit 5 | Bit 6 | Bit 7 | Bit 8 |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| SETTINGS | OFF | OFF | OFF | OFF | OFF | ON | ON | OFF |

| Bits | Setting | Value |
| --- | --- | --- |
| Bits 1 & 2 | EQ LO, fixed dB gain adjustment | 0 dB gain |
| Bits 3 & 4 | EQ HI, fixed dB gain adjustment | 0 dB gain |
| Bits 5 & 6 | Ducker dB gain adjustment | -6 dB ducking |
| Bits 7 & 8 | AGC and Noise Gate Settings | AGC FULL, Noise Gate OFF |

### OPTIONS

|  | Bit 1 | Bit 2 | Bit 3 | Bit 4 | Bit 5 | Bit 6 | Bit 7 | Bit 8 |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| OPTIONS | ON | OFF | OFF | OFF | OFF | OFF | OFF | OFF |

| Bits | Setting | Value |
| --- | --- | --- |
| Bits 1 & 2 | DDEQ configuration | Dynamic EQ enabled |
| Bits 3 & 4 | Auto-Answer configuration | OFF |
| Bit 5 | Send gain to phone | OFF |
| Bit 6 | Hx2 internal mix-minus enable | OFF |
| Bit 7 | Feedback Reduction enabled | OFF |
| Bit 8 | Reserved | N/A |

### INTERNAL

|  | Bit 1 | Bit 2 | Bit 3 | Bit 4 | Bit 5 | Bit 6 | Bit 7 | Bit 8 |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| INTERNAL | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |

| Bits | Setting | Value |
| --- | --- | --- |
| Bits 1 - 4 | Telephone Network configuration | USA, Canada |
| Bits 5 - 8 | Call Progress Tone Detection | USA dial tone |