---
title: "Factory Reset an Omnia.7 Audio Processor"
slug: "factory-reset-an-omnia7-audio-processor"
updated: 2026-11-02T23:18:13Z
published: 2026-11-02T23:18:13Z
canonical: "docs.telosalliance.com/factory-reset-an-omnia7-audio-processor"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Factory Reset an Omnia.7 Audio Processor

## Scope

This document explains how to reset the settings of an Omnia.7 Audio Processor back to factory defaults. This covers all styles of Omnia.7 Audio Processors.

## Description

Sometimes there is a need to reset the Omnia.7 back to factory defaults. Possible you simply need/like to start from the beginning or you prefer to start from a fresh install after a software update or simply for diagnosing any issue you face with the device.

## Before We Get Started

> [!WARNING]
> This document assumes that you have already installed the preferred software version on the Omnia.7 and the unit is up and running properly.

> [!NOTE]
> In case of need, be sure to perform a backup of your configuration before resetting the device back to factory defaults.

> [!CAUTION]
> Make sure to remove the unit from service and put your backup processor on the air.

## Perform the Factory Reset

1. The update .pak file downloaded from the Omnia website must be used as-is and should be copied to the root of an external USB drive.
2. [Download version v3.14.68(FM) file](https://telos-support.s3.us-east-1.amazonaws.com/Omnia/Omnia.7/fm/omnia7_updater_3.14.68.pak)
3. Or, [download v3.15.70 (AM) file](https://telos-support.s3.us-east-1.amazonaws.com/Omnia/Omnia.7/am/1601-00556-011_omnia7_updater_3.15.70.pak)
4. Save this to the root of your external USB drive.
5. Put the USB drive that includes the .pak file into the Omnia.7 USB connector on the front of the unit
6. Navigate to the **(Home / System / System Config / Software Update)** screen and Click on tab **'Update from USB'.** The unit will switch into audio bypass and will display a menu after a few seconds.
7. Click on **'Factory Reset'** - this will clear all the user settings on the Omnia.7 and will take a few seconds only
8. Once finished, use the **'Exit Updater'** to return back to normal Omnia.7 menu screen

## Let us know how we can help

If you have further questions on this topic or have ideas about improving this document, please [contact us](https://www.telosalliance.com/support-request).