---
title: "Front and Rear Panel Overview"
slug: "la5300-front-and-rear-panel-overview"
updated: 2024-11-05T06:59:07Z
published: 2024-11-05T06:59:07Z
canonical: "docs.telosalliance.com/la5300-front-and-rear-panel-overview"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Front and Rear Panel Overview

## LA-5300 Front Panel

![Figure 1 - Front panel](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/callouts(26)(2).png?sv=2026-02-06&spr=https&st=2026-11-07T18%3A12%3A52Z&se=2026-11-07T19%3A12%3A52Z&sr=c&sp=r&sig=3Jv5jUHEBuUpU0T0%2FMLfRZMeWnUbUfJQux%2B2AbZU3Ak%3D)

Figure 1 - Front panel

The front panel of the LA-5300 includes the following:

- **Reset button** for restarting the unit from the front panel (1A)
- **Four status LEDs** indicating the **status of each power supply** (1B, 1C), the **overall status** of the unit (1D), and **sync for the reference clock** (1E)
- A **color LCD display** to show status and basic configuration parameters (1F)
- A **five-button navigation cluster** with Left, Right, Up, and Down arrows plus a green “OK” button (1G)
- A **USB port** used for software updates (1H)

The front panel is used for the initial setup and configuration including setting the IP address of the Control Ethernet port. Additional configuration is accomplished via the remote user interface.

## LA-5300 Rear Panel

![Figure 2- Rear panel](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/callouts(26)(2)(1).png?sv=2026-02-06&spr=https&st=2026-11-07T18%3A12%3A52Z&se=2026-11-07T19%3A12%3A52Z&sr=c&sp=r&sig=3Jv5jUHEBuUpU0T0%2FMLfRZMeWnUbUfJQux%2B2AbZU3Ak%3D)

Figure 2- Rear panel

The rear panel includes the following connections:

- Two **RJ-45 Gigabit Ethernet connections**, one for network remote control (2A) and one for AES67 I/O (2B)
- Two independent **3Gb/s HD/SD-SDI inputs and outputs** (2C) on female BNC connectors
- **Quad-Link SDI** or **MADI I/O** (2D) - optional
- Five AES-3 I/O connections (2E) on female BNC connectors
- Parallel **GPI/O control port** (female DB-15) for five inputs and five outputs (2F)
- Two **IEC power inlets** for the redundant internal universal auto-ranging power supplies (2G)

> [!NOTE]
> **Note** - Although the hardware is present for two independent SDI I/O paths, only the first SDI I/O is active at this time.