---
title: "Making a Physical QOR Source Available on the AoIP Network"
slug: "making-a-physical-qor-source-available-on-the-aoip-network"
updated: 2024-12-16T11:47:10Z
published: 2024-12-16T11:47:10Z
canonical: "docs.telosalliance.com/making-a-physical-qor-source-available-on-the-aoip-network"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Making a Physical QOR Source Available on the AoIP Network

## Scope

This article covers the QoR based console systems. It describes how to share a source connected to a physical input with the rest of the AoIP / Livewire network.

## Description

The physical inputs on the QOR engine are primarily meant to be called up on the console to which the QOR is connected. Sometimes, it's necessary to present audio that is connected to a physical QOR input to the network. Setting this up requires possible sacrifices to be made.

## Disadvantages:

Remember that the QOR engine is not a node. It has a hard limit to the amount of Livewire / AoIP streams it can handle. Doing this will use up available Livewire / AoIP outputs.

If you can not sacrifice an AoIP output for this, it will be best to use a node for the input so that it can be [shared with two different consoles](/v1/docs/sharing-a-source-with-two-or-more-console-engines).

## Step 1: Determine Which Input to Configure

The **Sources** page lists the name of the source and the input to which it's connected. Use this to determine which physical input is to be presented to the network.

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/10e7e429-b8e2-4f21-a54c-0ae6c988c964.png?sv=2026-02-06&spr=https&st=2026-11-04T10%3A31%3A31Z&se=2026-11-04T11%3A31%3A31Z&sr=c&sp=r&sig=drDLUFgqSA0cJ8ERRbwY06%2BHGlOqOSKIcpPDbzj8uys%3D)

In this example, we will use the source called "**Air**," which is connected to the **Analog 16** input.

## Step 2: Configure an AoIP / Livewire Output

Go to the QOR's **Outputs** page and configure an available AoIP output:

- Set the **Output** to the appropriate input, in this case it's **Analog 16**
- Name the new source, we're calling it "**Air**"
- Set the **Channel** to an available LW channel number
- Set the **Mode** to the appropriate value. Here, we're using **Standard Stereo**.

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/73429c8d-5708-4bfa-9bfb-3919efc1d0e9.png?sv=2026-02-06&spr=https&st=2026-11-04T10%3A31%3A31Z&se=2026-11-04T11%3A31%3A31Z&sr=c&sp=r&sig=drDLUFgqSA0cJ8ERRbwY06%2BHGlOqOSKIcpPDbzj8uys%3D)

Now that channel 2701 (your's will likely be a different LW channel number) is being sent to the network, it can be used in a source profile on another console as a Livewire input, or as a destination (output) of a node somewhere on the network.

> [!NOTE]
> **NOTICE:** AoIP output 1 can no longer be used to provide an automatic backfeed to the network.

## Let us know how we can help

If you have further questions on this topic or have ideas about how we can improve this document, please [contact us](https://www.telosalliance.com/support-request).