---
title: "No uMPX Streams MkII O9 When Using Livewire"
slug: "no-umpx-streams-mkii-o9-when-using-livewire"
updated: 2024-12-17T14:17:56Z
published: 2024-12-17T14:17:56Z
canonical: "docs.telosalliance.com/no-umpx-streams-mkii-o9-when-using-livewire"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# No uMPX Streams MkII O9 When Using Livewire

## Scope

This document explains how to ensure that uMPX streams reach their destination when using Livewire on an Omnia.9.

## Description/Problem

Q: I'm using an Omnia.9 MkII that has uMPX encoding and Livewire both active. When I send uMPX streams to my MPX Node Decoder, it does not receive any stream. What can I check?

## Solution

A: Ensure that there is no Gateway address set for the LAN NIC in the Omnia.9. You should only set a Gateway address for the WAN NIC connected to the Internet or WAN feeding your network with connectivity to the MPX Node(s).

## Let us know how we can help

If you have further questions on this topic or have ideas about improving this document please [contact us](https://www.telosalliance.com/support-request).