---
title: "Removing the cover from your Axia PowerStation Integrated Console Engine"
slug: "removing-the-cover-from-your-axia-powerstation-integrated-console-engine"
updated: 2024-12-16T07:24:12Z
published: 2024-12-16T07:24:12Z
canonical: "docs.telosalliance.com/removing-the-cover-from-your-axia-powerstation-integrated-console-engine"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Removing the cover from your Axia PowerStation Integrated Console Engine

## Scope

This document applies to the Axia PowerStation Integrated Console engine with part number 2001-00251

## Tools Required

The tools required for removal of the cover are;

- #1 Phillips screwdriver
- 3.0mm Allen wrench - minimum length of 3 inches is required to reach all screws.

## Removing the top cover

The cover of the PowerStation is held in place by twelve Phillips-head screws accessed from the top of the cover and a total of ten Allen head screws accessed from the side.

### Remove the cover using the following steps

Remove the twelve Phillips head screws from the top of the cover as indicated

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/11f47a92-665e-4c71-a5e4-1e6bb4cd8fdc-image.png?sv=2026-02-06&spr=https&st=2026-11-07T18%3A28%3A41Z&se=2026-11-07T19%3A28%3A41Z&sr=c&sp=r&sig=GLASCMRzvKGOZfvHM1c9%2Bcv%2FsAjglk4OCb2vUIcMQgA%3D)

Remove the ten Allen-head screws (5 on each side) using a 3.0mm Allen wrench.

> [!WARNING]
> Only remove the screws circled in RED. Screws indicated in YELLOW should be left in place.

> [!WARNING]
> The two screws on the right are longer than the three on the left. This will be important for the reassembly of the lid.

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/d3deacc8-b378-482e-a863-58ae629319aa-image.png?sv=2026-02-06&spr=https&st=2026-11-07T18%3A28%3A41Z&se=2026-11-07T19%3A28%3A41Z&sr=c&sp=r&sig=GLASCMRzvKGOZfvHM1c9%2Bcv%2FsAjglk4OCb2vUIcMQgA%3D)

Once all screws are removed the lid can be lifted off to gain access to the inside of the PowerStation. The following picture shows the PowerStation with the top removed.

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/354303eb-1293-4488-8d27-9d7de25a1acd-image.png?sv=2026-02-06&spr=https&st=2026-11-07T18%3A28%3A41Z&se=2026-11-07T19%3A28%3A41Z&sr=c&sp=r&sig=GLASCMRzvKGOZfvHM1c9%2Bcv%2FsAjglk4OCb2vUIcMQgA%3D)

### Reinstalling the Cover

Reassembly of the cover is done in reverse order paying attention to the length of the screws in the side. As a reminder, the two side screws toward the front of the unit are longer than the three others.

> [!WARNING]
> To ease the reinstallation of the cover loosely start the 3.0mm Allen screws on both sides before securing the top with the Phillips screws and then tighten the screws.

## Let us know how we can help

If you have further questions on this topic or have ideas about improving this document, please [contact us](https://www.telosalliance.com/support-request).