---
title: "Setting up a Program like Zoom or Skype to work with an Axia Console"
slug: "setting-up-a-program-like-zoom-or-skype-to-work-with-an-axia-console"
updated: 2024-12-13T14:00:28Z
published: 2024-12-13T14:00:28Z
canonical: "docs.telosalliance.com/setting-up-a-program-like-zoom-or-skype-to-work-with-an-axia-console"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Setting up a Program like Zoom or Skype to work with an Axia Console

## Scope

This article covers the Axia IP-Driver and setup with programs such as Zoom or Skype for show contribution via an Axia console.

This procedure can be done with any PC audio interface that can connect to any Axia console. In this example, we will be using the Axia IP-Driver for the PC's audio interface and an iQ console.

## Configure the IP Driver

### Source

- Check the **ENABLE** checkbox
- Assign an unused channel number to the source
- Set the **Mode** to **Stereo**

### Destination

- In the corresponding **Destination** section, set the **Channel** to the same value as the **Source** in the previous steps
- Set the **Type** to **To Source**
- Click Apply

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/d7d0da27-e6e4-4398-a545-7543f2dd9868.png?sv=2026-02-06&spr=https&st=2026-11-12T11%3A02%3A54Z&se=2026-11-12T12%3A02%3A54Z&sr=c&sp=r&sig=Q0TsG2h02bbYVbia6TTNG%2BtUi%2BIEU1lg7lp5Ej%2BByBA%3D)

## Create a Source Profile

- Begin a new PHONE source profile in your console's engine.
- Name the Source and enter the channel number we just used in the driver to the profile.

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/01e96733-4a39-4391-83b8-2fab73ea47dc.png?sv=2026-02-06&spr=https&st=2026-11-12T11%3A02%3A54Z&se=2026-11-12T12%3A02%3A54Z&sr=c&sp=r&sig=Q0TsG2h02bbYVbia6TTNG%2BtUi%2BIEU1lg7lp5Ej%2BByBA%3D)

> [!WARNING]
> Because the feed to source mode defaults to Auto (PGM1/Phone), when this source is called up on the console, the engine will send a mix-minus back to the source using the "To Source" [Click here for more information.](/v1/docs/to-source-vs-from-source)

## Continue with setting up the PC application

At this point, you can go to your PC application (Skype, Zoom, etc.) and select the Livewire interface you've configured to be the microphone and speaker for your sessions.

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/325a3e14-f251-49e0-81b3-dc8808d578d0.png?sv=2026-02-06&spr=https&st=2026-11-12T11%3A02%3A54Z&se=2026-11-12T12%3A02%3A54Z&sr=c&sp=r&sig=Q0TsG2h02bbYVbia6TTNG%2BtUi%2BIEU1lg7lp5Ej%2BByBA%3D)

## Let us know how we can help

If you have further questions on this topic or have ideas about improving this document, please [contact us](https://www.telosalliance.com/support-request).