---
title: "Studio Engine BIOS for Intel D865GLC"
slug: "studio-engine-bios-for-intel-d865glc"
updated: 2024-12-13T09:01:02Z
published: 2024-12-13T09:01:02Z
canonical: "docs.telosalliance.com/studio-engine-bios-for-intel-d865glc"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Studio Engine BIOS for Intel D865GLC

The BIOS battery needs to be replaced, and the BIOS needs to be re-programmed. This involves removing the unit’s lid and plugging in a keyboard and monitor direct to the motherboard.

Once the lid is off, the CR2032 battery can be replaced.

## Power

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/2d773f79-a884-4fe4-8daa-2832f3c61035.png?sv=2026-02-06&spr=https&st=2026-11-07T18%3A04%3A53Z&se=2026-11-07T19%3A04%3A53Z&sr=c&sp=r&sig=A%2BJfMz8jd1YeGHIm23Ejj3UNnTrZRCY5RDVMfTAxzjQ%3D)

Front Panel header is on the bottom-right.

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/e07ae2e2-0349-4b61-83a0-4b00a3db6dc4.png?sv=2026-02-06&spr=https&st=2026-11-07T18%3A04%3A53Z&se=2026-11-07T19%3A04%3A53Z&sr=c&sp=r&sig=A%2BJfMz8jd1YeGHIm23Ejj3UNnTrZRCY5RDVMfTAxzjQ%3D)

> [!WARNING]
> Power Pins are directly above the reset cable.

## BIOS Settings

> [!WARNING]
> Press F2 to enter Setup.

### Main:

- System Time [hh:mm:ss]
- System Date [mm/dd/yy]

### Advanced:

- Peripheral Configuration
- Serial Port A [Auto]
- Parallel Port [Auto]
- Mode [Bi-directional]
- Audio [Disabled]
- Onboard LAN [Enabled]
- ASF Support [Enabled] [Enabled]
- Drive Configuration
- [PATA
- Primary Master : Sandisk SDCFB-256]
- Type [User]
- DMA Mode [Auto]
  - USB Configuration
- USB Function [Disabled]

### Power:

- After Power Failure [Power On]

### Boot:

- Silent Boot [Disabled]
- Intel Rapid Boot [Enabled]
- PXE Boot to LAN [Disabled]
- USB Boot [Disabled]
- Boot Device Priority [Disabled]
  - 1st Boot Device [3m – Sandisk SDCFB-256]
  - 2nd Boot Device [Disabled]

“Exit Saving Changes” or Press “F10” to save the changes and exit BIOS.

## Detection and Prevention

It is safe to hot-swap the CR2032 battery by lifting the lid and replacing while the unit is powered. This precludes the need to plug in a keyboard and monitor and reset BIOS configurations.

The CR2032 battery should be good for 3-5 years, so periodic maintenance every 2-3 years should suffice for routine maintenance. Schedule a unit shutdown test to verify as a part of the periodic maintenance regiment.