August, 2019. Cleveland, Ohio USA
Scope
This document applies only to Axia Studio engines already running version 3.0 or higher.
It is possible to install but is not recommended for Fanned-style Axia Studio Engines.
Installation
See Release Notes section below for download links
Using a Web Browser, log in to to the System Page of your engine
Take a backup of your configuration.
From the Mix Engine System page
press the Backup button and save the XML file to your PC
Make sure the active bank is Bank 0, if not press the “Commit” button.
Press the “Choose File” button and select the 3.2 update package that is located on your PC.
Press the “Upload” button to begin the update process. Wait for confirmation the process has completed and refresh the page.
Select Bank 1 radio button followed by the “Apply Selected Bank” button.
Provide confirmation when ready to reboot the Engine into the new software.
Fusion Engine version 3.2.2 Release Notes
NOTICE: Support of software updates for Fanned Engines is discontinued. Testing with fanned hardware is discontinued and that there is no guarantee that this software will work with said platform.
Click here to download version 3.2.2
Main improvements:
AES67 - supporting LWRP "fmt" field in ADDR
Defects fixed:
If CRMon or Preview are used as vmix inputs, when the engine is rebooted, they get set back to none
After upgrading to AES67 support, payload type in VMode output streams is set to 0
Sending unnecessary LWRP messages immediately after LWRP connection is started
Fusion Engine version 3.2 Release Notes
NOTICE: Support of software updates for Fanned Engines is discontinued. Testing with fanned hardware is discontinued and that there is no guarantee that this software will work with said platform.
Click here to download version 3.2.0
Main Improvements:
AES67 support: SIP connection control for unicast, SDP import and export
Automix function
LWCP: control over channel label, reading value of Virtual fader, subscription for Fader_Gain
Support for 4-Fader (T) module and Fader Accessory Panel
Xfer (transfer) support from Call Controller to Telos VX
Defects fixed:
Standard stream receiving problems
Higher than normal CPU usage after update
Stream diagnostics causing processing overloads on misconfigured or otherwise misbehaving systems
Slow execution of LWRP and LWCP commands
LWRP commands not accepted if ADDR contains "08" or "09"
Unclean shutdown of LWCP and LWRP connections
Incorrect presentation of packets count on the engine stream statistics page
Some audio outputs may be sent to wrong multicast addresses
AES67: unable to configure UDP port numbers higher than 32767
Intercom: occasional audio distortion on Preview output
Console: Loudness source F1 knob stops working
Console: Some dim gain values cannot be set on default backfeeds
Console: Fader Panel ViLoR support