--- title: "System Configuration Page" slug: "system-management-menus" updated: 2026-10-26T20:41:56Z published: 2026-10-26T20:41:56Z canonical: "docs.telosalliance.com/system-management-menus" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt > Use this file to discover all available pages before exploring further. # System Configuration Page The System Configuration (**System**) page provides menus to access to administrative functions including network settings, software maintenance, backups, logs, and user management. ![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/Screenshot 2026-09-22 at 10.44.15 AM(1).png?sv=2026-02-06&spr=https&st=2026-11-10T17%3A41%3A13Z&se=2026-11-10T18%3A41%3A13Z&sr=c&sp=r&sig=uCOyY0A9fqeCzSGT4BvcN00qgHyB2GkpOXbVTfacDj4%3D) System configuration page The System Configuration page can be accessed via the web UI, or directly by browsing to the Omnia XII IP address on port 8085. From the System Configuration page menus, you can: - View system information (software version, system status) - Back up system settings and software - Load or change software banks - Configure network and IP-based routing settings - Manage system logs - Change the login password - Access Telos Alliance support link - Configure system time information - Update software - Log out. **LOGOUT:** Each System Configuration page includes this control to log out of the current connection to the Omnia XII. ## System After you log in, the System Configuration (**System**) page opens. This is the default page for the System Configuration menus. ![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/Screenshot 2026-09-22 at 10.44.15 AM(1).png?sv=2026-02-06&spr=https&st=2026-11-10T17%3A41%3A13Z&se=2026-11-10T18%3A41%3A13Z&sr=c&sp=r&sig=uCOyY0A9fqeCzSGT4BvcN00qgHyB2GkpOXbVTfacDj4%3D) System configuration page This screen is primarily informational and has two sections: - **Version Information**: This shows which firmware bank is currently active and the version of software running in that bank. Version information includes the software build (**Version**), **OS Version** and **BIOS Version**. - **System Status**: This shows the current **Uptime** (elapsed time since the system booted in days, hours, and minutes), graphs representing the current **CPU usage** and **RAM usage. The Disk Space** section includes Omnia XII disk information: **Partition Size** (in MB), **Available Space** (available space, in MB), and **Percent Used** (the percentage of the full disk in use). The graphs are updated automatically every two seconds. ## Backup/Restore The **Backup/Restore** page presents a list of all backups in the system. If this is the first time using this page, there may not be any backups present in the system. ![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/Sys Config Backup.png?sv=2026-02-06&spr=https&st=2026-11-10T17%3A41%3A13Z&se=2026-11-10T18%3A41%3A13Z&sr=c&sp=r&sig=uCOyY0A9fqeCzSGT4BvcN00qgHyB2GkpOXbVTfacDj4%3D) Backup/Restore page Columns provide the **System Backup** file name, **Size**, and **Backup Date/Time** for each backup. Each backup row includes a **Restore** control and minus (-) sign. **Restore:** Each backup includes a **Restore** control. When clicked, the system requests confirmation that you really wish to restore the system using that backup. > [!WARNING] > Important! The restore function typically happens quickly, but keep in mind that the system will not be operational during the restore and reboot process. **Minus (-) Sign:** Each backup includes a minus sign, which lets you remove the backup to the left of the symbol. When clicked, you are given the option to click **OK** to delete the file or **Cancel** to cancel the operation. **Plus (+) Sign:** This single control, located below the minus sign for the last backup file, opens the **Create Backup** dialog. Here, you can create or upload a backup. When creating a backup, you can select whether you want logs and/or the IP address included in the backup, When uploading a backup, you can choose a file on your local system. Uploading is of value when you want to restore your configuration to a new system, a factory-default system, or a system that has had the desired backup removed from the system. ## Bank Control The **Bank Control** page displays software versions in both banks of Omnia XII and is used to select the active software bank. ![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/Sys Config Bank Ctrl.png?sv=2026-02-06&spr=https&st=2026-11-10T17%3A41%3A13Z&se=2026-11-10T18%3A41%3A13Z&sr=c&sp=r&sig=uCOyY0A9fqeCzSGT4BvcN00qgHyB2GkpOXbVTfacDj4%3D) Bank Control pag **Bank****:** This button selects which bank will be used on the next reboot. It also displays the currently selected bank as the next bank that will be active at reboot. **Reboot:** This button appears after changing the bank that will be used on the next reboot. Clicking **Reboot** will reboot into the selected bank. **Bank 0 and Bank 1:** These information tables display the software version in each bank. The currently active bank is identified by an asterisk next to the bank number. ## Configuration The **Configuration** menu provides controls for system reboot, factory reset, and network settings. ![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/Screenshot 2026-09-18 at 10.05.34 AM.png?sv=2026-02-06&spr=https&st=2026-11-10T17%3A41%3A13Z&se=2026-11-10T18%3A41%3A13Z&sr=c&sp=r&sig=uCOyY0A9fqeCzSGT4BvcN00qgHyB2GkpOXbVTfacDj4%3D) Partial view of Configuration page ### System Section **Reboot:** Reboots the Omnia XII. When clicked, a confirmation message indicating that audio will be interrupted for approximately 45 seconds. Click **OK** to reboot the system or **Cancel** to cancel the operation. **Factory Default:** Resets the Omnia XII to its factory defaults. When clicked, a confirmation message warns that all settings and files, including the IP address, will be deleted. Click **OK** to continue or **Cancel** to cancel the operation. **Edit:** Lets you change the hostname of your Omnia XII. Click **Edit**, enter a new host name, and then click **OK** or **Cancel**. This section displays current IP address information and provides configuration controls for the back-panel **NET1**, **NET2**, and **NET3** connectors. Network configuration settings made here are also reflected in the Omnia XII front-panel network settings. - **Name:** Displays the network connector name (**NET1**, **NET2**, or **NET3**). - **Mode:** Displays **Manual (Static)** or **Auto (DHCP)**, as configured with the **Configure** button. Select **Manual (Static)** when a fixed IP address is required. Select **Auto (DHCP)** to obtain network settings automatically from a DHCP server. - **IP Address:** Displays the IP address configured for the network connection. - **Net Mask:** Displays the network mask configured for the network connection. - **Gateway:** Displays the gateway address configured for the network connection. - **State:** Displays the current network interface state (**UP** or **DOWN**). - **Mac Address:** Displays the MAC address of the network interface. - **Configure:** Opens the network configuration controls, where you can edit **Mode**, **IP Address**, **Net Mask**, and **Gateway**. Click **OK** to save changes or **Cancel** to discard them. ### Network Configuration Section This section provides current IP address information and configuration controls for the back panel **NET1**, **NET2**, and **NET3** connectors. Network configuration settings made here are also reflected in the Omnia XII front-panel network settings. - **Name:** Displays the network connector name (**NET1**, **NET2**, or **NET3**). - **Mode:** Displays **Manual (Static)** or **Auto (DHCP)**, as configured via the **Configure** button. Select **Manual (Static)** when a fixed IP address is required. Select **Auto (DHCP)** to obtain network settings automatically from a DHCP server. - **IP Address:** Displays the IP address configured for the network connection. - **Net Mask:** Displays the network mask configured for the network connection. - **Gateway:** Displays the gateway address configured for the network interface. - **State:** Displays the current network interface state (**UP** or **DOWN**). - **Mac Address:** Displays the Mac address of the network interface. - **Configure:** Opens the network configuration controls, where you can edit **Mode**, **IP Address**, **Net Mask**, and **Gateway**. Click **OK** to save changes or **Cancel** to cancel them. > [!WARNING] > Important! Network interface changes do not take effect until the Omnia XII is rebooted. After making network changes, the pending changes are displayed in parenthesis, and a Reboot button becomes available. **DNS Servers:** Displays the DNS server addresses configured for **NET 1**, **NET 2**, and **NET 3**. By default, the DNS server address is set to 8.8.8.8. If necessary, you can change the DNS server address. Click the **Configure** button to the right of the DNS server addresses to access the **Dns Entrie**s dialog. This dialog includes: - **<< and >>:** Change the order of the DNS servers in the list. Omnia XII attempts to connect to the server at the top of the list first. If that connection cannot be made, it attempts the next server in the list. - **Add:** Adds a server to the list. - **Remove:** Removes the selected DNS server from the list. - **OK:** Saves any changes and closes the **Dns Entries** dialog. - **Cancel:** Discards the changes and closes the **Dns Entries** dialog. > [!WARNING] > Important! DNS changes do not require a reboot to become active. ## Logs The **Logs** page provides access to system log files that Telos Alliance may request for troubleshooting. ![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/Sys Config Logs.png?sv=2026-02-06&spr=https&st=2026-11-10T17%3A41%3A13Z&se=2026-11-10T18%3A41%3A13Z&sr=c&sp=r&sig=uCOyY0A9fqeCzSGT4BvcN00qgHyB2GkpOXbVTfacDj4%3D) Logs page **Download Logs:** Click this button to download the logs as a .tar file to your computer’s default download location. **Search:** Enter characters to search for log filenames containing those characters. **Show # entries:** Select the maximum number of logs displayed at one time. Choices include 10, 25, 50, and 100. The default is 10. If multiple logs are available, page numbers and navigation buttons appear below the listing. **Columns:** The columns display the log **Filename**, **Last Updated** date and time, and **File Size in kB**. Click the arrows in a column heading to sort the list by that column, such as displaying filenames alphabetically or sorting the **Last Updated** date. **Filename:** Click a log filename to open a read-only version of the log in your browser. Alternatively, right-click the filename to download the file or copy a link to the file. **First, Previous, 1, Next, and Last:** These controls let you navigate through logs when they span multiple pages (based on the **Show # entries** setting). ## Password This menu lets you change the password used to access the Omnia XII web UI. ![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/Sys Config Password.png?sv=2026-02-06&spr=https&st=2026-11-10T17%3A41%3A13Z&se=2026-11-10T18%3A41%3A13Z&sr=c&sp=r&sig=uCOyY0A9fqeCzSGT4BvcN00qgHyB2GkpOXbVTfacDj4%3D) Password page **Password:** Enter the new password. **Confirm:** Enter the new password again to confirm it. **Save:** Saves the new password. ## Support Link The **Support Link** menu is a tool for Telos Alliance to remotely access your unit. Clicking the menu button immediately sends your Omnia XII link information to Telos Alliance. This menu does not access a menu page, as there are no user controls or options. It does not access a menu page. > [!CAUTION] > Warning! Support Link is a remote access tool. Telos Alliance only recommends activating Support Link when Telos Alliance request it to be open. It is best practice to keep Support Link disabled unless explicitly asked by Telos Alliance to enable Support Link. ## Time The Time configuration page lets you set the time zone, define NTP servers, and, if NTP is unavailable, set system time from your local PC. Setting the time is important as it is used for system logs. ![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/Screenshot 2026-09-18 at 10.17.56 AM.png?sv=2026-02-06&spr=https&st=2026-11-10T17%3A41%3A13Z&se=2026-11-10T18%3A41%3A13Z&sr=c&sp=r&sig=uCOyY0A9fqeCzSGT4BvcN00qgHyB2GkpOXbVTfacDj4%3D) Time page in System Configuration **Current Timezone:** This drop-down menu provides an expansive list of possible timezones, so that you can set the Omnia XII clock to your timezone. If Omnia XII has internet access, the **Unit ISO Time** and **Unit Local Time** will update. > [!NOTE] > **Note:** A reboot may be necessary. If the time does not update, Omnia XII does not have access to reach the NTP servers. **Ntp servers**: This box lets you manage the list of servers in your system. - **Add:** This button lets you add an NTP server that Omnia XII has access to. - **<< and >>:** These arrow buttons let you set the order of NTP servers that Omnia XII will attempt to make a connection. By default, the first server (the server at the top of the list) is tried first. If a connection cannot be made, Omnia XII will try the next server in the list. To change the order of a server in the list, click the server and use the arrow buttons to move the server through the list of servers. - **Remove:** After selecting a server in the **Ntp** servers list, you can click **Remove** to delete the server from the list. **Set time from PC:** When Omnia XII cannot connect to an NTP server, time can be set from the PC used to access Omnia XII. After clicking this button, Omnia XII will use the PC’s time for one time clock adjustment. After this adjustment is made, Omnia XII keeps time locally. ## Upload Update ![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/Sys Config Upload.png?sv=2026-02-06&spr=https&st=2026-11-10T17%3A41%3A13Z&se=2026-11-10T18%3A41%3A13Z&sr=c&sp=r&sig=uCOyY0A9fqeCzSGT4BvcN00qgHyB2GkpOXbVTfacDj4%3D) Upload Update page **File Upload:** Use this control to upload a new version of Omnia XII via your browser. After choosing the file in your browser, you can click **Begin** to start the upload operation or **Change** to choose a different version. Clicking another System Configuration menu will clear the browser. Once the file completes uploading, you can load it into the Omnia XII using the **Bank Control** menu. ##