Approved Virtual Machine Hypervisors
The Virtual Machine (VM) instance of Pathfinder Core PRO has been verified on the following VM hypervisor engines:
VMware 6.7.0
Hyper-V Server 2016
ProxmoxVE 5.1-41
VirtualBox 5.2
Stratus everRun 7.5.05
This document does not cover the setup of a VM hypervisor engine. The customer is responsible for setting up and understanding the VM engine in use.
Minimum VM Instance Requirements
The virtual instance created should have the following minimum settings applied:
2 GB RAM
4 GB hard drive storage (fixed allocation)
2 processor allocation
Bridged network adapter (minimum of 1 bridged for the Livewire network)
It is recommended to use Paravirtualized VirtIO, VMware VMXNET3, or Intel Pro options for network interface emulation.
Important Note: Larger amounts of RAM, faster processors, more processors for better parallelization, and additional hard disk space can be used for large systems to improve performance and capacity or to make more space available for logging.
Installation
Once the VM instance is defined, point the VM to load the ISO file provided with the purchase. Start the VM instance, and the system begins to install.
The system will ask you to type 20 random characters. Tap random keys on the keyboard at varying speeds until the system tells you to stop. This will initialize the random number generator. When complete, the system will instruct you to press the ENTER key.
The system will warn you about overwriting the hard drive (a virtualized instance). The system expects to find a virtualized SATA drive, and if it cannot be found, the installation will not continue. If the drive is found, the system asks for a second confirmation. Press "y" to proceed. When installation completes, the system asks you to remove the ISO image. Make sure you remove the ISO pointer before proceeding (eject the virtual CDROM). Press any key to reboot the new installation. After bootup, the first step is to assign an IP address to the system.
IP Address Configuration
You must assign an IP address to your Pathfinder Core PRO VM instance before you can use it. The screen at the VM terminal can be navigated using the arrow keys and the ENTER and ESC keys.
(21)(1)(1).png?sv=2026-02-06&spr=https&st=2026-11-22T16%3A26%3A40Z&se=2026-11-22T16%3A39%3A40Z&sr=b&sp=r&sig=q6JDQ6V8wDByF5gjxCmIzPps4i9RmvZjDAmVTSapyc4%3D)
Press ENTER to access the configuration menu
Use the UP/DOWN arrow keys to highlight the NETWORK menu option, then press ENTER
Use the UP/DOWN arrow keys to highlight the LIVEWIRE network interface, then press ENTER
Configure the IP settings, using the UP/DOWN arrow keys to increment or decrement the values and the ENTER or ESC keys to edit or exit each option; you can also type numerals instead of using the arrow keys
After configuring the IP, NETMASK, and GATEWAY settings, select DONE and press ENTER
Repeat this process for the Office interface and the DNS configuration (DNS may be required for email configuration)
Once all configurations are complete, navigate to Reboot and Apply Settings and press ENTER, then confirm any request; the system reboots using the new network configuration
First Time Licensing Access and Setup
Pathfinder Core PRO 2.0 is licensed with a Key9 license key, which the system activates with the Telos license server. The VM needs internet access to reach the license server; offline activation is only offered on hardware units.
Access the web interface by typing the IP address you configured earlier into a web browser
The first time you connect to a new system, the first-time setup page appears. Type a password for the Admin user in New password and again in Confirm password
Read the End User License Agreement, check I have read and accept the End User License Agreement, and click Set password and continue

An authentication window will appear; type the following values: Username = Admin, Password = the password you just set
Select Sign in to load the Pathfinder Core PRO control panel

Click System > Licenses in the navigation bar
Select [ Add New License Key ] in the list, type or paste the Key9 license key you received with your purchase into License Key, and click Add License

The system contacts the license server; when activation succeeds, the key appears in the list and the license points, features and TelosCare subscription are shown above it
License changes may require a restart before newly licensed services become fully functional; restart from System > Configuration if asked
If the license does not activate, check that the VM's DNS servers and gateway are set and that it can reach the internet. See the Licensing article for license server settings and health warnings.
Once the licensing is complete and the networked devices are online, you may move to the Discovery section.