--- title: "1.2.xx.xx" slug: "v17-12xxxx" updated: 2024-11-08T06:37:59Z published: 2024-11-08T06:37:59Z canonical: "docs.telosalliance.com/v17-12xxxx" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt > Use this file to discover all available pages before exploring further. # 1.2.xx.xx ### Version 1.2.13.00 03/26/2018 - Fixed an issue with DayOfWeek timers during the Daylight Savings Time Shift. - In some cases it was causing an endless loop for an hour after each DayOfWeek timer scheduled for the day the time springs forward. - This was also causing the watchdog to reboot the system periodically until the hour after the timer should have fired had passed. - Fixed a bug that was causing the cluster backup generator to sometimes hang and then fail in the backup generation. - Fixed a bug where cluster backups in a plus GMT timezone could not be deleted due to the plus in the filename. - In this version plus is replaced with underscore in the generated name. ### Version 1.2.12.00 02/26/2018 - Fixes an issue with passwords with certain characters. - Due to a malformed regex some passwords would not get written properly from the web page password editing to the back end. - When setting the Admin password this could cause a lockout of admin capabilities forcing a call to support. - Characters that could cause problems prior to this update include: \^$.|?*. - While this version fixes the problem, you may have to forcefully reload the web page to make sure the new code versus cached code is used. - In chrome while on the user page, hold Ctrl and Shift while clicking refresh to reload the new JavaScript files. - It is also not a bad idea to have a second Admin user that works before changing the password of the primary admin user. That will allow access if the password change is problematic. - Fixed an issue with Classic Ids being incorrect between two nodes of a cluster when a device was added after the cluster was formed. - This could cause issues with user panel controls which would work when connected to one server and not the other. - While this fixes the bug that was causing the classic id mismatches, it is recommended to do a manual sync to force synchronicity if you find this to be a problem in your system. - To do a manual sync go to the secondary server and click the manual sync button. - This will request a special backup from the primary, pull it over to the secondary, and exeucte a restore on the secondary. - Added warning messages if the file selected for a bank update does not appear to be named correctly for the deployment target. ### Version 1.2.11.00 02/16/2018 - Fixed an issue with log writers that were tcp listeners. - Changing the log parameters was sometimes causing an application crash due to a socket exception. - Updated Client/Mini links to 5.81. - Made meterfaders send -3276.8 to console fader when below -79.0 to force the Fader_State=DOWN value. - Fixes an issue where meterfaders were not populating controls properly if pointed at fusion vmixers or console channels. - Fixes an issue where meterfaders were not controlling console gain faders correctly. ### Client/Mini 5-81 02/16/2018 > [!NOTE] > Important Notes: Updates to the Pathfinder Client and Mini for Core only. This Client update can be used with Core PRO software 1.2.2.00 or later - Made meterfaders send -3276.8 to console fader when below -79.0 to force the Fader_State=DOWN value. ### Client/Mini 5-80 02/15/2018 > [!NOTE] > Important Notes: Updates to the Pathfinder Client and Mini for Core only. This Client update can be used with Core PRO software 1.2.2.00 or later - Fixes an issue where meterfaders were not populating controls properly if pointed at fusion vmixers or console channels. - Fixes an issue where meterfaders were not controlling console gain faders correctly. ### Version 1.2.10.00 02/08/2018 - Fixed potential issues with item deletes and the possibility of the web page refreshing before the message was sent. - Fixed a problem where the base io editing on routers would not work correctly if numbering was off. - Fixed an issue where the page could be reset after editing base ios before all messages got sent to the server. ### Version 1.2.9.00 02/06/2018 - Fixed an issue where legacy panels could endlessly causing excessive cpu load trying to rectify classic ids if the classic id does not exist. - Incorporated scripting changes related to the dynamic construction of a core dll from 1.3.7.04 as they apply to 1.2.xx as well. - Fixed a bug with virtual IO base point editing that was preventing the removal or reordering of base points in a virtual io. - Fixed a bug that was causing virtual base IO reordering and sometimes deleting of base io points not to work correctly. - In some cases the final rectification was incorrectly ordering the base ios. - The divergence point in the base point analysis was generating a delete message based on the path including the mount point instead of just the virtual base io path. - Note: Base IO reordering still may not be entirely correct. Still testing and tweaking the code. - Changed client link to 5.78 which disables/hides the Scheduling button which is non-functional in CorePro. - Changed client application links to point to PathfinderPc.com instead of internally to save some space on the cf card. ### Version 1.2.7.00 12/14/2017 - Based on 1.2.6.00 - Added scrolling on logic flow folders for long lists of folders in the web UI. - Added some code to force ownership and securities on network config files during a restore operation including an update restore. - Attempts to fix a reported issue where occasionally the office network cannot be changed from the web page. - Fixed an issue where double clicking on an endpoint would select the correct property but sometimes would display the incorrect property description. - Fixed a bug where deleting combiner inputs was not always causing the combiner to get rewritten to backing storage. - As a result the deleted passiveinput ids would load after a restart even though no translator was hooked to them. - This could cause unassigned states on those combiner inputs and prevent the combiner from analyzing properly after the reboot. - This fix will prevent this from happening with future flows. - If you have a flow in this state it is easiest just to recreate it. - If the flow is particularly complex to recreate, contact support as there are ways using the API to remove the extra combiner inputs. - Added a hover balloon over combiners to show the passive input count. - Used to determine a discrepancy in the input count. - This will allow you to determine if a combiner is in the state mentioned above where it has more inputs than translators tied to its inputs. ### Version 1.2.6.00 12/06/2017 - Based on 1.2.5.00 - Fixed a bug that was preventing the creation of String Builder memory slots. This was broken as of 1.0.0.36 when startup states were introduced. - Fixed a bug that was causing Virtual Routers not to show the Other source state in many situations. ### Version 1.2.5.00 11/28/2017 - Adjusted the settime parameter when setting the time from local pc to enforce more complete and proper formatting between the JavaScript browser and PathfinderCore PRO. - Modified the backup script to include the DNS settings file. - Previous to this change DNS settings were being lost during firmware updates. - Note: the update uses the existing backup script to do the update so DNS will have to be reset after this update and should then be correct for future updates. - Refactored some code in LogicFlowManager which theoretically might leave objects in ram that had been deleted when a complete folder was deleted. - Fixed a bug in Client and Mini that was causing frozen meters when audio cut out in some situations where decay rate was used. - This fix requires installing the 5.77 version of mini and client. ### Version 1.2.4.00 11/13/2017 - Fixed a bug introduced in 1.2.1.00 that in certain rare cases could cause logging to create a deadlock on the SapV2 connection. ### Version 1.2.3.00 11/09/2017 - Fixed a bug that was causing Logic Flow views to leave residual data in the backing storage after more than 1 rename of a view. - Changed the audio alarms web page data table to make the save state option enabled. - Changed the scenes web page data table to have filtering enabled. ### Version 1.2.2.00 11/03/2017 > [!NOTE] > Important Notes: You may need to hold cntrl-shift and click refresh to refresh the logic flows web page the first time after updating to ensure you are not using cached javascript. > > Be sure to update client applications (client, mini, panel designer) to the versions in this software package. - Fixed an issue with day of week timers in a cluster that was causing them not to fire on subsequent days in some situations. - The elapsed property on a Day of week event when in a cluster was not resetting back to false such that the next day event would not happen. - The elapsed property should now flip back to false 10 seconds after it flips to true. ### Version 1.2.1.00 11/02/2017 > [!NOTE] > Important Notes: You may need to hold cntrl-shift and click refresh to refresh the logic flows web page the first time after updating to ensure you are not using cached javascript. > > Be sure to update client applications (client, mini, panel designer) to the versions in this software package. - Fixed inconsistencies between lists on the web pages as far as pagination controls and count fields. - Limited send buffer size of network loggers. - Fixed a file access problem with log file writers after changing the write fields. - Fixed a bug that was sometimes causing day/time and day of week timers not to execute when in clustering after a restart. - Fixed a bug where a collection in log files was growing with repeat instances of file information. - Removed some DateTimeOffset calls that were unnecessary. - Cleaned up some string processing for potentially faster results. - Added code to not send poll messages if send buffer already has things waiting in the queue. - This prevents the queue from increasing and causing a memory leak. - Discovered that meters were defaulting to an incorrect polling rate and not respecting the request of the clients. - This in some cases was causing the memory to leak. - Removed a LastContacted datetimeoffset that was getting set with every set of bytes received as it was degrading performance. - Fixed an issue with send buffers that theoretically could allow dequeued items to still consume memory. ### Version 1.2.0.00 10/20/2017 > [!NOTE] > Important Notes: You may need to hold cntrl-shift and click refresh to refresh the logic flows web page the first time after updating to ensure you are not using cached javascript. > > Be sure to update client applications (client, mini, panel designer) to the versions in this software package. - Updated the manual to version 1.2. - Fixed a bug that could cause client silence bubbles to appear on a node's alarm web page after a restart when in a cluster. - Updated the bank description. - Fixed an issue where if both nodes have the same office ip address, cluster reconnects could end up causing a node to connect to itself. - Now the system will not try to connect to a remote cluster node on a local ip address. - Fixed issues where event system state changes were not being raised to subscriptions in all cases. - This meant sometimes you had to refresh the clustering web page to see the actual event system state. - Fixed an issue where leaving a cluster would delete the ClusterAdmin user from all other nodes in the cluster as well.