Step by step instructions on how to install Telos Infinity Dashboard

Dashboard is the system configuration and management software for the Telos Infinity Intercom System. This document covers how to install Dashboard. For more detailed information about using Dashboard please consult the full user manual, found at our Infinity Web Portal.

Preparing to Install

Before starting the installation there are a few items that are required. Below is a list of everything needed for a successful Dashboard installation.

A computer that is running Windows 10 or above and is connected to the Internet
Make sure that the computer has all Windows updates installed
The Dashboard software has been downloaded from our web portal
Ensure that the Windows user account that Dashboard will be installed under has Administrative rights

Installing Dashboard

Running the executable

To install Dashboard, double-click on the executable (exe) file to launch the installer. Follow the on-screen prompts.

Telos Infinity Dashboard Setup screen with instructions for installation and navigation options.

Click the next button now to continue installing the program.

After launching the InstallShield Wizard, please select to accept the license terms.

License agreement for installing Telos Infinity Dashboard with acceptance instructions.

Then from the next screen, either accept the default location to install the Dashboard Services or click the browse button to select a preferred location.

Installation setup for Telos Infinity Dashboard with destination folder and space details.

With the install location selected, click next and follow the on-screen prompts until the final page shows.

Completing the setup for Telos Infinity Dashboard with installation confirmation and finish option.

Click the FInish button now to complete installing the program.

We recommend having your network/NIC in order before installing Dashboard. If you change your NIC after installing Dashboard, you might have some connectivity issues. If you have to change the NIC used for Dashboard, please contact Technical Support.

System Setup

IP Address Filter: Creates a White List of IP Address ranges that Dashboard is allowed to scan within. To configure a range, click ‘Add’ and the pop up shown below will appear. Enter the range start IP Address that Dashboard should be able to scan from in the left 4 boxes, and then the upper IP Address in the right 4 boxes. When complete click ‘Add’ to save the range. If the system requires multiple ranges, repeat this process until all ranges have been added. You can also leave this blank to allow Dashboard to scan the whole network.

Renderer: A Renderer is a dynamic mixer that facilitates the summed audio for Groups, IFB’s and Partylines within the Infinity Intercom System. The output of a Renderer is sent on a unique multicast stream address, which Dashboard and the Infinity system will automatically determine.

Renderer Channel Lower: Sets the value for the lowest possible multicast address used by the Groups, IFB’s and Partylines.

Renderer Channel Upper: Sets the maximum possible multicast address used by Groups, IFB’s and Partylines.

If the Renderer channel options are left blank, Dashboard will default the lower possible channel to be 29000. This is fine for most systems, but if you know that this might clash with your other Livewire/AoIP devices, we recommended setting a specific Renderer range.

Node Password: Select chosen password for connected Livewire and Livewire+ Devices if the password field is not left blank.

Once all fields within the Agent Configuration sheet have been entered, click Finish to advance the installer.

Follow any remaining onscreen prompts. The last prompt that appear will have option to finish the process and a tick box to start "Start Infinity Now". Make sure the box is checked and then click Finish.

Opening Dashboard

If you are using Dashboard Application, all you need to do is start the installed Dashboard icon.

If you are using Dashboard Server, you may notice that there are no new icons are applications on your computer. This is because Dashboard Server runs in the background, and can be accessed through a web browser.

Open up a web browser (we recommend Google Chrome), navigate to localhost:5000. You should see the login screen for Dashboard Server:

Login interface for Telos Infinity with fields for username and password.

The default administrator login is:

user: admin

password: admin

Once logged in, you should see your Infinity devices on the left side. If they are not there yet, be patient, as it can take a couple of minutes for Dashboard to scan the network for the first time.

The last step will be to enable the NIC needed to talk to the AOIP network so Dashboard can discover your devices.

Configuration settings for network connections, including AoIP and API options displayed.

LET US KNOW HOW WE CAN HELP

If you have further questions on this topic or have ideas about how we can improve this document, please contact us.

Configuration and Firmware