---
title: "What are the default IP addresses a Quasar System ships with?"
slug: "what-are-the-default-ip-addresses-a-quasar-system-ships-with"
updated: 2025-02-13T23:25:46Z
published: 2025-02-13T23:25:46Z
canonical: "docs.telosalliance.com/what-are-the-default-ip-addresses-a-quasar-system-ships-with"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# What are the default IP addresses a Quasar System ships with?

## Scope

This document applies to all Quasar Console systems that were assembled and tested at the factory.

### Description

Each Quasar Console that is assembled at the factory is tested. In doing so, IP addresses are assigned to many of the components.

The following IP addresses are assigned for testing;

- Quasar MTS-MON (Master Touch Screen - Monitor) module - 192.168.2.100
- Quasar XR Fader Modules - Starting at 192.168.2.11 and increment from there, depending on how many modules are in your system.
- Quasar Engine - 0.0.0.0

> [!WARNING]
> Since you may have more than one Quasar Console in your system, it is best to set (change) the IP addresses BEFORE you plug them into the larger network to avoid IP address conflicts.

### Configuration

Please see our configuration Quick Starts for setting these IP addresses.

- Click here for the [Quasar Engine](/v1/docs/quasar-engine-installation-configuration#setting-an-ip-address) configuration document.
- Click here to set the IP Address of the [MTS-MON module](/v1/docs/quasar-surface-network-configuration).
- Click here to assign IP Addresses to your individual [XR Fader Modules](/v1/docs/quasar-surface-fader-module-discovery-configuration).