---
title: "X13 (2026) Platform"
slug: "x13-2026-platform"
updated: 2026-02-19T20:53:09Z
published: 2026-02-19T20:53:09Z
canonical: "docs.telosalliance.com/x13-2026-platform"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# X13 (2026) Platform

## Connections

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/image-DFEY2B3U.png?sv=2026-02-06&spr=https&st=2026-11-07T17%3A44%3A34Z&se=2026-11-07T18%3A44%3A34Z&sr=c&sp=r&sig=a75vY5Or1dHjeY0OQglIApCaOoYT%2Bq5TKsm6gvqp2kM%3D)

| Reference | Notes |
| --- | --- |
| 1 | Connect the **top** NIC (when viewed from the back of the Pathfinder Core PRO) to your office network to use panels and other capabilities provided by Pathfinder Core PRO from office computers. |
| 2 | Connect the **bottom** NIC to your AoIP network using a Cat-6 Ethernet cable |
| 3 | Using the supplied IEC cables, connect the Pathfinder Core PRO’s power supply input to AC mains. |
| 4 | The video connectors (VGA, HDMI, DP) on the back of the Pathfinder Core PRO engine is only needed for configuring the initial IP address settings. Alternatively, you can configure a network in the same range as the default IP addresses and configure via the web interface. |

## IP Address Configuration

Your system is configured from the factory with default Livewire and office IP address as follows:

Top NIC (Office): 10.10.2.100 with a netmask of 255.255.255.0 Bottom NIC (AoIP/Livewire): 192.168.2.100 with a netmask of 255.255.255.0

These IP addresses can be changed either by attaching a monitor and USB keyboard and using the intuitive menu or by browsing to the default IP address as described below.

### **Screen and Keyboard IP Address Assignment**

Attach a monitor to the VGA port (or any other video port) on the back of PathfinderCore PRO and a USB keyboard to the USB port. You will see a menu dialog similar to this:

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/(1)(21)(1).png?sv=2026-02-06&spr=https&st=2026-11-07T17%3A44%3A34Z&se=2026-11-07T18%3A44%3A34Z&sr=c&sp=r&sig=a75vY5Or1dHjeY0OQglIApCaOoYT%2Bq5TKsm6gvqp2kM%3D)

Menu navigation uses the arrow keys and the ENTER and ESC keys.

- Press **ENTER** to access the configuration menu
- Use the UP/DOWN arrow keys to highlight the NETWORK menu option, then press **ENTER**
- Use the UP/DOWN arrow keys to highlight the LIVEWIRE network interface, then press **ENTER**
- Configure the IP settings using the UP/DOWN arrow keys to increment or decrement the values and the ENTER or ESC keys to edit or exit each option; you can also type numerals instead of using the arrow keys
- After configuring the IP, NETMASK, and GATEWAY settings, select **DONE** then press **ENTER**
- Repeat this process for the **Office** interface and the **DNS configuration** (DNS may be required for email configuration)
- Once all configurations are complete, navigate to **Reboot and Apply Settings** and press **ENTER;** confirm any request; the system will reboot to the new network configuration.

You may now move on to the Discovery section of this guide.

[Discovery](/v1/docs/v110-discovery)

### **Alternate Network IP Address Configuration**

- Attach the right NIC of Pathfinder Core PRO to a network switch
- Attach a computer to the same switch and configure the computer’s IP address to be within the 192.168.2.xx range, but avoid using 192.168.2.100
- Using a web browser, browse to 192.168.2.100
- Log in using the default Username and Password: Username = Admin Password = Admin
- Click on the Configuration link

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/(7)(13)(1)(1).png?sv=2026-02-06&spr=https&st=2026-11-07T17%3A44%3A34Z&se=2026-11-07T18%3A44%3A34Z&sr=c&sp=r&sig=a75vY5Or1dHjeY0OQglIApCaOoYT%2Bq5TKsm6gvqp2kM%3D)

- Use the Configure buttons to change the IP address, Netmask, and Gateway for both the Livewire and Office network interfaces
- Click the Reboot button to restart with the new IP addresses

You may now move on to the Discovery section of this guide.

[Discovery](/v1/docs/v110-discovery)