Licensing

After starting the container, you will have access to the configuration pages through the IP address of the container. Click on the License Setup link.

Figure 1 - License setup

An authentication popup will appear. The default login is user with no password.‌

You will need to define the IP address of the license server. This could be another machine on the network or the same machine depending on how it was installed. If it was installed on the same machine as the iQs container, use the local loopback address as shown below. For more information about setting up a license server, see the Licensing section.

Figure 2 - IP address of license server

Begin by generating a Base license in the License type dropdown, then click the Generate button.

Figure 3 - New license request

If iQs is pointed to a working license server, it will return a response to download a request code.

Figure 4 - License request code

If not, the following error response will be returned. See the Troubleshooting section for help.

Figure 5 - License error response

After successfully downloading the request code for the base license, repeat the steps for each additional 4 fader license. Once all request codes have been downloaded, send them via e-mail along with your purchase order number to [e-mail].

Once your request has been verified, your license key(s) will be sent back to you. Return to the License page and select each file using the Choose File button followed by the Install button.

Figure 6- Installing licenses

Once all licenses are installed, the license table will populate and you will be able to define the size of the iQs surface using the Configure Faders dropdown.

Figure 7 - Configuring faders