Front and Rear Panel Overview
Last updated
Last updated
Front panel features include:
USB 3.0 Type A connector (A)
6.3mm (1/4") stereo headphone jack (B)
1440x240 TFT touch display (C)
Rear panel features include:
Dual 110V - 240V auto-ranging redundant load-balancing power supplies with individual power switches (A)
Four RJ45 1GB Ethernet connections for control and AoIP; LAN 3/4 internally connected to a switch (B)
USB 3.0 Type A connector (C)
Status LED; green indicates normal operation (D)
INIT/RESET button; pressing briefly will shut down the CPU; pressing and holding until the Status LED flashes five times will return the unit to factory default settings (E)
USB 2.0 Type B connector for connecting to consoles, audio interfaces, etc. (F)
MADI I/O; SFP cages to hold modules for optical connections as MADI or tieLight interfaces (G)
75Ohm BNC external sync connector, supporting Word Clock, AES, Black Burst, and Tri Level (H)
AES I/O via 25 pin D-Sub female connector; provides 4x AES3 In and Out; may be configured for 2x In and 6x Out (I)
Analog Output via 25 pin D-Sub female connector; provides 8x balanced analog outputs (K)
Analog Input via 25 pin D-Sub female connector; provides 8x balanced analog inputs, or may be configured for 4x In and 4x Out for a total of 12x analog outputs (L)
IF 1 - IF 4 slots to accommodate optional SD/HD/3G-SDI, 4x AES3 I/O, 4x analog I/O, 8x analog out, MADI I/O (optical or BNC) or Dante/AES67 interface boards (J)
