Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
O_DAP_SDI_a
Video complies with SMPTE 424/425M (3G, Level A and B), SMPTE 292M (HD), or SMPTE 259M (SD)
Automatic format detection
Audio embedding and de-embedding complies with SMPTE 299M (3G, HD) or SMPTE 272M -AC (SD)
Metadata embedding and de-embedding complies with SMPTE 2020-2
2970/296Mbps (3G), 1485/1483.5Mbps (HD), 270Mbps (SD)
1080p - 23.975, 24, 25, 29.97, 30, 50, 59.94, 60
1080i - 50, 59.94, 60
720p - 23.975, 24, 25, 29.97, 30, 50, 59.94, 60
625i - 50
525i - 59.94
User selectable 0 ... 15 frames, can be disabled
24-bit, transparent forwarding of PCM and compressed audio
Sample rate = 48kHz (SDI compliant)
Channels = 16 inputs and 16 outputs (4 groups of 4 channels each)
Delay = Embedder audio delay selectable 0 ... 320ms per channel
1 channel input, 1 channel output, SDID selectable
Impedance = 75Ohm
Return loss = >15dB 5 ... 1485MHz; >10dB 1485 ... 2970MHz
Maximum cable length = 250m (SD), 230m (HD), 140m (3G) using Belden 1694A cable
Jitter tolerance = >0.7UI (alignment)
Impedance = 75Ohm
Output voltage = 0.8Vpp (typical)
Return loss = >15dB 5 ... 1485MHz; >10dB 1485 - 2970MHz
Output jitter = <0.2UI (alignment), <0.5UI (timing)
Video latency input to output = 120 ... 200 pixel, depending on video standard
Audio latency input to output, embedder and de-embedder combined = <0.6ms (HD, 3G), <2ms (SD)
Power fail relay bypass (may be enabled/disabled via GUI)
Lip-sync compensation for processed and non-processed audio signals via video delay
Dedicated routing for non-processed channels; all channels (maximum 16) can be routed to/from the device or looped through
Test pattern generator (no genlock)
Master-sync capable
ITU-R BT.1685 / ARIB STD-B39 metadata support
24-bit D/A converter
8 output channels (for speakers)
Sample rate = 44.1, 48, 88.2, 96kHz
8 channels
Connector type = D-Sub25 female
Maximum output level (0dBFS equivalent) = 0 ... 24dBu, adjustable in 0.5dB steps
Impedance = 50Ohm (typical), differential
THD+N = -91dB @ 0dBFS = 15dBu, 1kHz
Dynamic range = >103dB (RMS)
Crosstalk attenuation = >103dB @ 0dBFS = 15dBu, 1kHz
Frequency response = 20Hz ... 20kHz (< +/-0.3dB) @ 48kHz; 20Hz ... 43kHz (< +/-0.3dB) @ 96 kHz
Power faillure glitch prevention
Balanced analog outputs
Electrical isolation between outputs and device
24-bit sigma-delta A/D converter, 24 bit D/A converter
4 input channels, 4 output channels
Sample rate = 44.1, 48kHz
4 channels
Connector type = D-Sub25 female connector
Input Level (maximum) 0dBFS equivalent = 0 ... 24dBu, adjustable in 0.5dB steps
Impedance = 20kOhm (typical), differential
THD+N = -93dB @ 0dBFS = 15dBu, 1kHz
Dynamic range = >110dB (RMS)
Crosstalk attenuation = >93dB @ 0dBFS = 15DBu, 1kHz
CMRR = >71dB @ 0dBFS = 15dBu, 1kHz
Frequency response = 20Hz ... 22kHz (< +/-0.1dB) @ 48kHz; 20Hz ... 43kHz (<+/-0.1dB) @ 96kHz
4 channels
Connector type = D-Sub25 female connector
Output level (maximum) 0dBFS equivalent = 0 ... 24dBu, adjustable in 0.5dB steps
Impedance = 50Ohm (typical) differential
THD+N = -91dB @ 0dBFS = 15dBu, 1kHz
Dynamic range = > 103dB @ 0dBFS = 15dBu, 1 kHz
Frequency response = 20Hz ... 22kHz (< +/-0.1dB) @ 48kHz; 20Hz ... 43kHz (<+/-0.1dB) @ 96kHz
Power fail relay bypass between inputs and outputs
Balanced analog inputs and outputs
Electrical isolation between inputs, outputs, and device
Relevant specifications comply with AES10-2008 and AES11-2009
24-bit, transparent forwarding of PCM and compressed audio
Sample rate = 44.1, 48, 88.2, 96kHz (88.2, 96kHz short framing)
64/56 channels @ 44.1 and 48kHz; 32/28 @ 88.2 and 96kHz
Connector type = LC (IEC 61754-20)
Center wavelength = 1310nm (typical), 1270 ... 1360nm
Input optical power
O DAP MO MM a = -31 ... -8dBm, OM2 multimode (50/125um)
O DAP MO SM a = -23 ... -8dBM, singlemode (standard values, others upon request)
Cable length maximum
O DAP MO MM a = 1.5km, OM2 multimode
O DAP MO SM a = 2km, singlemode (standard values, others upon request)
Optical and BNC outputs carry the same signal
Impedance = 75Ohm
Output voltage = 0.6Vpp (typical) @ 75Ohm
Field-replaceable optical module (SFP)
Reference-grade Wordclock recovery, master-sync capable
Dedicated routing for non-processed channels
All channels (maximum 64) can be routed to/from the device or looped through
AES3 channel status management, non-audio detection
Parallel outputs (BNC/LC) for media conversion
Technical specifications for AIXpressor and all available option boards plus D-Sub pin assignments are provided the following sections.
Multi-channel audio processor
Rear panel AES3, analog, MADI, tieLight I/O
3k x 3k cross-point audio router
Front panel headphone jack
Expandable by hardware option boards
Versatile audio processing via licensed algorithms
48kHz
+/- 150ppm sync input capture, +/- 25ppm master-sync stability
Relevant specifications comply with AES3-X-2009, IEC 60985, and AES11-2009
4 inputs (8 input or 4 input /4 output channels switchable) on D-Sub 25 connector
24-bit transparent forwarding of PCM and compressed audio without SRC (sample rate converter)
24-bit PCM with SRC activated
Impedance = 75Ohm single-ended
Input level = 0.3 ... 5Vpp @ 75Ohm single-ended
Sample Rate Converter (SRC) = THD+N -120dB @ 0dBFS, 1kHz, latency <0.3ms
Relevant specifications comply with AES3-X-2009, IEC 60985, and AES11-2009
4 outputs (8 output channels) on Sub-D 25 connector
24-bit transparent forwarding of PCM and compressed audio
Impedance = 75Ohm single-sided
Output Voltage = 1Vpp (typical) @ 75Ohm single-ended
Power fail relay bypass between AES/EBU inputs and outputs (can be deactivated by internal jumper)
SFP spec, typically 125MBps
SFP spec, typically 125MBps
SFP spec, typically 2.5GBps
Multi-standard synchronization interface for AES/EBU, Wordclock, or video sync (including black burst and tri-level); complies with AES11-2009 and relevant audio or video standards.
Connector type = BNC
AES/EBU Input = 0.3 ... 5Vpp @ 75Ohm single-ended
Wordclock input = 1 ... 5Vpp @ 75Ohm single-ended
Video-sync input = 1Vpp (nominal) @ 75Ohm single-ended
Supported rates = 23.975, 24, 24.975, 25, 29.97, 30, 49.95, 50, 59.94, and 60 fps (SD and HD)
4x RJ45 connectors, 1Gbit/s Ethernet auto sense, full duplex, audo MDI/X
Front and rear USB A 3.0 connectors
Internal USB A 2.0 (for license keys)
Rear USB 2.0 connectors
4 general-purpose expansion slots for Jünger option boards
Dual power supplies with automatic failover
85 ... 264VAC, 50 ... 60Hz, 58W (max)
Operating temperature = 0 ... 50°C, fan cooled
Non-operating temperature = -20 ... 70°C
Humidity < 90% non-condensing
19" x 1RU, 27cm depth
Net weight ca. 5kg
Shipping weight ca. 7.5kg
Video complies with SMPTE 424/425M (3G, Level A and B), SMPTE 292M (HD), or SMPTE 259M (SD) with automatic format detection
Audio embedding and de-embedding comply with SMPTE 299M (3G, HD) or SMPTE 272M-AC (SD)
Metadata embedding and de-embedding complies with SMPTE 2020-2
2970/2967Mbps (3G), 1485/1483.5Mbps (HD), 270Mbps (SD)
1080p - 23.975, 24, 25, 29.97, 30, 50, 59.94, 60
1080i - 50, 59.94, 60
720p - 23.975, 24, 25, 29.97, 30, 50, 59.94, 60
625i - 59.94
525i - 59.94
User selectable 0 ... 15 frames; can be disabled
Bit depth = 24 bit, transparent forwarding of PCM and compressed audio
Sample rate = 48kHz (SDI compliant)
Channels = 16 inputs and 16 outputs (4 groups of 4 channels each)
Delay = Embedder audio delay selectable 0 ... 320ms per channel
1 channel input, 1 channel output, SDID selectable
Impedance = 75Ohm
Return loss = >15dB 5 ... 1485MHz; >10dB 1485 ... 2970MHz
Maximum cable length = 250m (SD), 230m (HD), 140m (3G) using Belden 1694A cable
Jitter tolerance = >0.7UI (alignment)
Impedance = 75Ohm
Output voltage = 0.8Vpp (typical)
Return loss = >15dB 5 ... 1485MHz; >10dB 1485 - 2970MHz
Output jitter = <0.2UI (alignment), <0.5UI (timing)
Video latency input to output = 120 ... 200 pixel, depending on video standard
Audio latency input to output, embedder and de-embedder combined = <0.6ms (HD, 3G), <2ms (SD)
Power fail relay bypass (may be enabled/disabled via GUI)
Lip-sync compensation for processed and non-processed audio signals
Dedicated routing for non-processed channels; all channels (maximum 16) can be routed to/from the device or looped through
Test pattern generator (no genlock)
Master-sync capable
ITU-R BT.1685 / ARIB STD-B39 metadata support
Relevant specifications comply with AES3-X-2009, IEC 60985, and AES11-2009
Electrical isolation between inputs, outputs, and device (if configured for differential mode, 110Ohm)
Master-sync capable
Connector type = D-Sub25 female connector
24-bit, transparent forwarding of PCM and compressed audio (without SRC)
24 bit PCM with sample rate converter activated
Sample rate = 44.1, 48, 88.2, 96kHz (32 ... 196kHz @ inputs with SRC)
Non-audio detection
4 inputs
Impedance = 110Ohm or 75Ohm, jumper selectable (110Ohm default)
Input level = 0.3 ... 5Vpp @ 110Ohm differential
4 outputs
Impedance = 110Ohm or 75Ohm, jumper selectable (110Ohm default)
AES3 channel status management,
The AES3 inputs and outputs provide a relay bypass feature that, when enabled, activates in the event of a power failure or upon a deliberate command from the GUI.
In order to enable the relay bypass feature, the jumpers for each AES3 pair (A) must be in place as shown in Figure 1 below. Removing the jumpers prevents relay bypass from occurring.
| Pin (Female Connector) | Function |
|---|---|
| Function | |
|---|---|
1
Output 4 +
2
Ground
3
Output 3 -
4
Output 2 +
5
Ground
6
Output 1 +
7
Input 4 + / Output 6+
8
Ground
9
Input 3 - / Output 5 -
10
Input 2 +
11
Ground
12
Input 1 -
13
Not Used
14
Output 4 -
15
Output 3 +
16
Ground
17
Output 2 -
18
Output 1 +
19
Ground
20
Input 4 - / Output 6 -
21
Input 3 + / Output 5 +
22
Ground
23
Input 2 -
24
Input 1 +
25
Ground
1
Output 4 +
2
Ground
3
Output 3 -
4
Output 2 +
5
Ground
6
Output 1 +
7
Input 4 + / Output 6+
8
Ground
9
Input 3 - / Output 5 -
10
Input 2 +
11
Ground
12
Input 1 -
13
Not Used
14
Output 4 -
15
Output 3 +
16
Ground
17
Output 2 -
18
Output 1 +
19
Ground
20
Input 4 - / Output 6 -
21
Input 3 + / Output 5 +
22
Ground
23
Input 2 -
24
Input 1 +
25
Ground
1
Output 8 +
2
Ground
3
Output 7 -
4
Output 6 +
5
Ground
6
Output 5 -
7
Output 4 +
8
Ground
9
Output 3 -
10
Output 2 +
11
Ground
12
Output 1 -
13
Not Used
14
Output 8 -
15
Output 7 +
16
Ground
17
Output 6 -
18
Output 5 +
19
Ground
20
Output 4 -
21
Output 3 +
22
Ground
23
Output 2 -
24
Output 1 +
25
Ground
Audio-over-IP (AoIP) by Dante™ Digital Audio Networking Standard; parallel operation in AES67 mode
24-bit, transparent forwarding of PCM and compressed audio
Sample rate = 44.1, 48, 88.2, 96kHz
2x RJ45 1Gbit/s Ethernet
Primary and secondary ports configurable as redundant or switched
Inputs = 64 channels @ 48kHz to AIXpressor
Outputs = 64 channels @ 48kHz from AIXpressor
AES67 compliant
SMPTE 2110-30 compliant
PTP v2 / v1 sync
Non-audio detection for input channels
Glitch-free Dante / SMPTE 2022-7 audio redundancy
Relevant specifications comply with AES10-2008 and AES11-2009
24-bit, transparent forwarding of PCM and compressed audio
Sample rate = 44.1, 48, 88.2, 96kHz (88.2, 96kHz short framing)
65/56 channels @ 44.1 and 48kHz; 32/28 @ 88.2 and 96kHz
Impedance = 75Ohm
Input level = 0.15 ... 0.8Vpp @ 75Ohm
Cable length maximum = 150m using Belden 1694A cable
64/65 channels @ 44.1 and 48kHz; 32/28 @ 88.2 and 96kHz
Impedance = 75Ohm
Output voltage = 0.6Vpp (typical) @75Ohm
Input cable equalizer for extended range and robustness
Reference-grade Wordclock recover, master-sync capable
Dedicated routing for non-processed channels; all channels (max 64) can be routed to/from the device or looped through
AES3 channel status management, non-audio detection