Home Page
Connect the Telos Infinity INF-BP-2 to a network and either connect using the DHCP address automatically provided or enter the IP address manually programmed into the front Panel configuration.
When successfully connected, the following will be displayed.
Label
A user field to describe the operational use of the Panel. In this example it's used in the Producers position.
ID
Unique factory set number and cannot be changed.
Location
User field to describe the physical location of the INF-BP-2 to assist with system diagnosis.
Ch1
User field to select audio channel for Ch1 Talk push button
Ch2
User field to select audio channel for Ch2 Talk push button
Program
Source and name of program-listen feed. In addition, through Dashboard, INF-BP-2 provides a “PGM” input. This is situated next to the key assignments on Dashboard and allows additional audio to be sent to the Beltpacks.
IP Address
User configurable IP Address Number set by the user from the front Panel control.
MAC Address
Unique Media Access Control address set in the factory and cannot be changed.
Gateway IP Address
User configurable Gateway IP Address Number set by the user from the front Panel control.
Serial Number
Unique number set by the factory to identify the INF-BP-2 and cannot be changed
Software Version
Set by current software version running on the INF-BP-2. This is changed when software upgrades are loaded.
PTP Port State
Describes the port state of the Precision Time Protocol interface running on the IP/Ethernet connection. This is either listening, slave or master depending on the configuration.
PTP Master ID
Describes the PTP master identifier. This is useful when multiple PTP master clocks are available in a BMC (Best Master Clock) redundant configuration.
PTP Master Offset
Describes the time offset from the PTP master clock. This helps when configuring and diagnosing a system.
Device Temperature
Internal temperature of the unit. To keep ambient noise as low as possible, the INF-BP-2 does not use any cooling fans.
Device Up Time
Number of days, hours, minutes, and seconds the INF-BP-2 has been powered on for.
Last updated
