Maintenance Page
Last updated
Last updated
Selecting the “Maintenance” page will provide a method for updating the Telos Infinity INF-MXP-20 software and some factory reset and self-test features.
The INF-MXP-20 has two memory banks to store firmware. Only one can be active, and the other is used to download the new firmware. If the firmware fails for any reason, the other bank can be enabled to provide a seamless roll-back function.
This provides a convenient method to remotely diagnose an INF-MXP-20 Panel.
Remotely reboot the INF-MXP-20. The Panel will become temporarily unresponsive to the browser during reboot.
Remotely self-test the INF-MXP-20. The Panel will become temporarily unresponsive to the browser during self-test.
Performs full remote factory reset. This will require entering a new IP address and will be unresponsive to the browser until the new IP address is entered using the front-Panel menu options.
Performs full remote factory reset but keeps the existing IP address configuration.
In the unlikely event that you should need support from Telos engineers, they may ask you to download the log file and email it to them for added support.
License keys are available from your Telos representative to provide additional functionality. The following describes how to enable a “Link” license.
Open the web browser, enter the IP address of the device. When prompted for the username and password, this defaults to “user” for the username, and nothing to be entered for the password field.
From the home page, click on the “Maintenance” tab and the software update and licensing window appears.
Enter the license key into the license-key window and if this is recognized as a valid key, the “Activate” button will be enabled. Click “Activate” to then activate the license.
The “Disable” button allows the licenses to be deactivated form the panel or beltpack and moved to another panel or beltpack.
