VIP Link
Last updated
Last updated
Infinity Link is a licensed feature that can be installed on Infinity VIP to provide a voice-over-IP (VoIP) interface for internet connectivity. A full description of the Link feature is provided in the Infinity Intercom manual.
For Infinity VIP, sixteen codecs are available on the network allowing the Livewire+™ AES67 input and output pairs of each codec to be converted to VoIP internet connectivity. The codecs will appear within the Infinity Dashboard Input/Output sections, each identified by its unique label.
To open the Link configuration, click on “Link” on the VIP Server home page. The following window will appear:
Each link must be individually configured and require the following steps:
Assigning input and output labels so that the Link interface appears in Dashboard.
Configuring a Livewire+ AES67 input and output pairs.
Enabling/disabling the SAP (Session Announcement Protocol) advertisement.
Configuring codec parameters.
Enable or disable the Link by clicking on the dropdown menu and selecting "Enable" or "Disable".
Enter the desired Channel or Address of the Input and Output channels as appropriate, the provide a "friendly" label for the input and output. These labels determine how these connections appear in Dashboard.
Enable or disable SAP announcement using the Output SAP Advertisement dropdown.
Enter the IP address:port number in the Peer Device Information field (for example, 192.168.0.105:39162). Only the port number is required for the Receive Port.
Click on the Codec Profile dropdown to display the list of available codecs and bitrates:
Selecting the "Custom" option allows a specific bitrate mode (fixed or variable) and bitrate to be set.
