Completing Network Configuration

From the left side menu, choose Network under the Configuration heading. The current settings for the Livewire (LAN) and WAN interfaces are displayed.

Configuring the Livewire (LAN) Interface (1)

  • Set the Network address

  • Set the Netmask

Note that the Livewire interface does not require or support a Gateway or DNS.

Configuring the WAN Interface (2)

  • Set Network Address A

  • Set Netmask A

  • Set Gateway A

  • Check the "Enable Configuration Access from WAN" if desired (3)

  • Click "Apply", then answer "Yes" to allow the system to restart

Note - Using the "B" network configuration is an advanced topic covered in detail in the User Manual.

Last updated