Note that part numbers are included for reference only. Telos only sells completed cable assemblies and will not sell individual parts. Diagrams and manufacturer part numbers are provided without a warranty of any kind. We can not support customer-built cable assemblies. Cable assemblies in excess of 40 ft are NOT recommended.
CABLE DRAWING
PARTS USED
Ferrite Bead (1 required)
Telos Part Number: 1118-00035-100
Desc: FERR BEAD 211-OHM@100MHZ 14.2MM-OD X 28.5MM-L X 7.2MM-ID
Manufacturer Part Number: WURTH 74270045
Molex Connector (2 required)
Telos Part Number: 1201-00271-100
Desc: CONNECTOR, CBL HOUSING, FEMALE, 6-POS, 3X2, 4.2MM-SP
Manufacturer Part Number: Molex 39-01-2060
Molex Crimp Pins (12 required) - Not shown on drawing, 6 pins per end.
Telos Part Number: 1202-00016-100
Desc: CONT, CRIMP FOR MLX MINI-FIT, GOLD-PL
Molex Part Number: 39-00-0086 (loose) or 39-00-0085 (chain)
TE Connectivity Strain Relief (1 required)
Telos Part Number: 1202-00044-100
Desc: STRAIN-RELIEF FOR MLX MINI-FIT
Manufacturer Part Number: TE Connectivity 1375618-1
Belden 7929A Cat 5e DataTuff FTP Cable (length will vary)
Telos Part Number: 1292-00037-100
Desc: CAT-5E SOLID 8-COND [4-PAIR DRAIN & SHLD] 24AWG 300V 75C BLACK
Manufacturer Part Number: Belden 7929A
.0375 black shrink tube (2 inches each end)
Telos Part Number: 1293-00002-100
Desc: SHRINK 0.375" BLK
Manufacturer Part Number: Many
Wire Ties - .01 in X 4 in Nylon (3 required)
One on either side of Item #1 holds ferrite bead in place. One used to hold Item #4 cable strain relief in place
Telos Part Number: 1326-00003-100
Desc: WIRE-TIE 3.9" X 0.1" NYLON
Manufacturer Part Number: Many
CABLE PINOUT
