Scope
This document applies to any computer which uses the Axia IP-Driver. Primarily this affects Windows computers.
Configuration
For computers operating on an Axia network, it will be necessary to manually configure firewall settings to allow UDP and TCP communications between the PC and the Axia network on specific local ports. Without these firewall rules, programs like the IP-Audio Driver may appear to function normally. Still, they will not be able to exchange audio, GPIO, or advertisement with the Axia network.
This document outlines the ports needed for the IP Driver to function correctly. There are far too many operating system combinations to give specific instructions for each; however, the TCP and UDP port information is the same regardless of the OS. Also, many 3rd Party programs have firewall components. Norton and McAfee are very common and can also block ports needed for proper operation.
Hence, the general nature of this document.
If you are having problems, the first tip is to disable everything. Turn the operating system firewall OFF and either turn off or uninstall any 3rd party programs. Then selectively turn these back on to know where you need to create rule exceptions.
Ports Used
Livewire Advertisement, Port 4001, UDP
Livewire Advertisement Req, Port 4000, UDP
Livewire Clock, Port 7000, UDP
Livewire Source Allocation, Port 2060, UDP
Livewire Audio Streams, Port 5004, UDP
Livewire Routing Protocol, Port 93, TCP
SIP Unicast, Port 5060, UDP
Click here for a running list of ports used by many Telos Alliance products.
Regarding AES67
Ports used for AES67 audio are user-definable. That is to say, while Livewire uses port 5004 for all audio packets, the user can define AES67 audio ports. You will need to adjust your firewall settings to accommodate situations outside the Livewire specification.
Let us know how we can help
If you have further questions on this topic or have ideas about improving this document please contact us.