---
title: "Firmware Package 5.59 for Axia iQ, Radius, RAQ & DESQ Consoles"
slug: "firmware-package-559-for-axia-iq-radius-raq-desq-consoles"
updated: 2025-02-16T17:12:43Z
published: 2025-02-16T17:12:43Z
canonical: "docs.telosalliance.com/firmware-package-559-for-axia-iq-radius-raq-desq-consoles"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Firmware Package 5.59 for Axia iQ, Radius, RAQ & DESQ Consoles

## Scope

This update is a firmware package for your iQ-Series consoles. This includes;

- iQ Main and Expansion consoles used with a QOR Console Engine
- iQx Main and Expansion consoles
- RAQ and DESQ consoles used with QOR Console Engine.

> [!WARNING]
> This firmware is only for the console surface and is not the same as the software version used when navigating the main web page.

## Changes in this release

- OLED Brightness redefinition for value 0. Setting 0 in brightness settings will trigger an OFF condition.

## Installation

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/image-84AMGUL1.png?sv=2026-02-06&spr=https&st=2026-10-30T17%3A38%3A54Z&se=2026-10-30T18%3A38%3A54Z&sr=c&sp=r&sig=4u6eJv24nOEf4YofkA7hpLo0P38hk31CB6tBmbQlaXA%3D)

> [!CAUTION]
> **Make sure you know what and why you are attempting to update.** In some cases, this version may be **OLDER** than the version your system shipped with. It is recommended that you do not update unless you are instructed to do so.

1. Download the file [1661-00002-010(iq_firmware_group_file).bin by clicking HERE](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/1661-00002-010-iq-firmware-group-file.bin?sv=2026-02-06&spr=https&st=2026-10-30T17%3A38%3A54Z&se=2026-10-30T18%3A38%3A54Z&sr=c&sp=r&sig=4u6eJv24nOEf4YofkA7hpLo0P38hk31CB6tBmbQlaXA%3D) and save it to your PC in a convenient location.
2. Access the QOR control center from a browser by entering the IP address.

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/6bba017c-fac4-49a7-9a78-11762f8f70f2-image.png?sv=2026-02-06&spr=https&st=2026-10-30T17%3A38%3A54Z&se=2026-10-30T18%3A38%3A54Z&sr=c&sp=r&sig=4u6eJv24nOEf4YofkA7hpLo0P38hk31CB6tBmbQlaXA%3D)
3. Select the **Module Information** link
4. At the bottom of the Modules page, locate the Upload Firmware and select **Choose File** button and locate the file previously downloaded.
5. With the correct file selected, press the **Upload** button.
6. The firmware group file is loaded and each module provides a drop-down to select the new firmware.
7. Select the new firmware and press the **Update** button to load the firmware.

> [!WARNING]
> The module will stop operations as it loads and starts the new firmware but will resume on its own
8. Repeat steps six and seven for each module listed, including the IQ Overbridge module.

Once complete, all modules should show **Firmware version: 5.59** as shown here.

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/78753821-8ee5-435a-b6f1-d45b1537d90f-image.png?sv=2026-02-06&spr=https&st=2026-10-30T17%3A38%3A54Z&se=2026-10-30T18%3A38%3A54Z&sr=c&sp=r&sig=4u6eJv24nOEf4YofkA7hpLo0P38hk31CB6tBmbQlaXA%3D)

### Firmware v5.59 Release Notes

#### Version 5.59

- Brightness value of 0 will set the display into OFF state.

#### Version 5.56

- Added support for new serial ROM due to EOL issues.

#### Version 5.52

- Brightness test of overbridge added.
- Third meter controls brightness in test-mode.

#### Version 5.50

- Self-test mode improvement

## Let us know how we can help

If you have further questions on this topic or have ideas about improving this document please [contact us](https://www.telosalliance.com/support-request).