PDM II was released to Production August 9, 2021
Version 2.0.0
Release date June 4, 2025 via ECO #3161
Introduction
This is a major new version of the PDM II firmware, replacing version 1.0.0 and other release candidates.
New features
GPIO inputs are now debounced
Web UI
Now uses a dark background
Most LCD-only configuration items are now available on webUI (web password, time zone, format, sound I/O configuration)
Can now set the hostname
Can use ports other than port 5004 in AES67 mode
Can now set AoIP packet size
The default Delayed Data buffer size is changed from 100kB to 1MB; if installed on a system with the old default, updates to 1MB
Bugs fixed
Web UI
On delayed data stream A, "Remote TCP" and "Local UDP" swapped
AES67 transmit address labeled "Receive Address"
Bypass relay not disengaged if boot mode set to "BUILD"
If the unit time was way off, SupportLink "Test Connection" would fail
If the unit time was way off, PD Alert showed "no valid TLS certificate."
Front panel confidence meters didn't work when in bypass
If NTP fetch failed, the status display was wrong
Numeric digits in the hostname were mis-handled
Tickets addressed
The above items correspond to the following internal ticket numbers: 16272, 16395, 16407, 16692, 16693, 16941, 17583, 17591, 18774, 19077, 19239, 19339, 19479, 19564, 19645, 19909, 20031, 20058, 20087, 20284, 20435, 20436, 20506, 20516, 20518, 20519, 20520, 20543, 20584, 21429, 21920, 22167, 22846, 22847, 22921, 22922, 22924, 22925, 23094, 23102, 23235, 23241, 23337, 24168, 24566
Version 1.0.0-rc2
Release date December 1,2021
Initial release to manufacturing, never released as a public update
Version 1.0.0
Release Date March 10, 2022 Via ECO # 2722
External changes
Minimum latency changed from 150ms to 175ms
Web UI now properly shows bank information
Web UI copyright changed from 2021 to 2022
TelosConnect email form removed
Other web UI tweaks
Other changes and improvements
Logging tweaks
Output buffer bumped from 20ms to 40ms
Added /bank0/boot_version.txt to log packages
TelosConnect communications cleaned up
Internal Documentation