---
title: "Wiring AES/EBU inputs and outputs on a StudioEdge"
slug: "wiring-aesebu-inputs-and-outputs-on-a-studioedge"
updated: 2025-01-23T00:34:42Z
published: 2025-01-23T00:34:42Z
canonical: "docs.telosalliance.com/wiring-aesebu-inputs-and-outputs-on-a-studioedge"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.telosalliance.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Wiring AES/EBU inputs and outputs on a StudioEdge

## Scope

This document covers wiring of the AES/EBU inputs and outputs on the StudioCore and StudioEdge. Part numbers covered by the document are;

- 2001-00631 StudioEdge
- 2001-00632 StudioEdge with Dual PSU
- 2001-00633 StudioCore
- 2001-00634 StudioCore with Dual PSU
- 2001-00635 StudioCore + CAN
- 2001-00636 StudioCore + CAN with Dual PSU

---

## Description

The AES/EBU Inputs and outputs are shown as item 10 on this image. AES/EBU Outputs are on the top connector. AES/EBU Inputs are on the bottom connector

> All connections are fully described in the [Quick Start Guide](/v1/docs/axia-studio-core-edge-qsg#connections)

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/image-CFF45THS.png?sv=2026-02-06&spr=https&st=2026-10-28T09%3A36%3A18Z&se=2026-10-28T10%3A36%3A18Z&sr=c&sp=r&sig=gayTJtD0%2Ba8dQSJLfPT8Uby0qcWbBxEV5Z94tyTOMcY%3D)

The RJ45 connectors for AES/EBU Inputs and outputs on the StudioEdge and StudioCore only partially use the StudioHub wiring standard, as they carry all three available AES/EBU channels on a single connector.

---

## Wiring

When using standard RJ45 adapters that follow the StudioHub standard, the first two AES/EBU Inputs and the first two AES/EBU outputs are available via the Left (AES/EBU1) and Right (AES/EBU2) connectors

> If the third AES?EBU channel is needed a custom cable will be required. As of this writing this cable is not avilable for purchase from any known suppliers.

The AES/EBU inputs and outputs use the first three pairs of the RJ45 connector.

In the TIA/EIA 568B standard, that is;

- Pair 1 - Orange pair - Pins 1 & 2 (AES 1)
- Pair 2 - Green pair - Pins 3 & 6 (AES 2)
- Pair 3 - Blue pair Pins 4 & 5 (unused)
- Pair 4 - Brown pair - Pins 7 & 8 (AES 3)

In the TIS/EIA 568A standard, that is;

- 
  - Pair 1 - Green pair - Pins 1 & 2 (AES 1)
  - Pair 2 - Orange pair - Pins 3 & 6 (AES 2)
  - Pair 3 - Blue pair Pins 4 & 5 (unused)
  - Pair 4 - Brown pair - Pins 7 & 8 (AES 3)

Regardless of the cable standard used, the direct pins are shown here.

> Note the pair on pins 4 and 5 of the RJ45 are not used

![](https://cdn.document360.io/57e3cd80-d493-453c-9672-ad1b043dadc3/Images/Documentation/image-WUJ9BVY0.png?sv=2026-02-06&spr=https&st=2026-10-28T09%3A36%3A18Z&se=2026-10-28T10%3A36%3A18Z&sr=c&sp=r&sig=gayTJtD0%2Ba8dQSJLfPT8Uby0qcWbBxEV5Z94tyTOMcY%3D)