Film Cap User buttons module, Acessory Panel, or Rack Panel GPIO Table
Note to users of iQ and Radius consoles. When configuring the button to interface with a GPIO port, select the “Livewire Mirror” option followed by a Livewire number (1 -32767) in the GPIO Channel field. The corresponding GPIO port should have a matching Livewire number.
Inputs (GPI)
ID | Name | Pin | Notes |
GPI 1 | BUTTON 1 lamp (top button) | Pin 11 | Illuminates the button while active |
GPI 2 | BUTTON 2 lamp | Pin 12 | Illuminates the button while active |
GPI 3 | BUTTON 3 lamp | Pin 13 | Illuminates the button while active |
GPI 4 | BUTTON 4 lamp | Pin 14 | Illuminates the button while active |
GPI 5 | BUTTON 5 lamp (bottom lamp) | Pin 15 | Illuminates the button while active |
Outputs (GPO)
ID | Name | Pin | Notes |
GPO 1 | SWITCH 1 (top button) | Pin 1 | Active when button pressed |
GPO 2 | SWITCH 2 | Pin 2 | Active when button pressed |
GPO 3 | SWITCH 3 | Pin 3 | Active when button pressed |
GPO 4 | SWITCH 4 | Pin 4 | Active when button pressed |
GPO 5 | SWITCH 5 (bottom button) | Pin 5 | Active when button pressed |