The following are the Factory Default Settings for the SETTINGS, OPTIONS, and Internal Telephone Network/Call Progress Tone Detection (CPTD) DIP switches. They will work in most cases, but should be considered a “starting point."
SETTINGS
Bit 1 | Bit 2 | Bit 3 | Bit 4 | Bit 5 | Bit 6 | Bit 7 | Bit 8 | |
|---|---|---|---|---|---|---|---|---|
SETTINGS | OFF | OFF | OFF | OFF | OFF | ON | ON | OFF |
Bits | Setting | Value |
|---|---|---|
Bits 1 & 2 | EQ LO, fixed dB gain adjustment | 0 dB gain |
Bits 3 & 4 | EQ HI, fixed dB gain adjustment | 0 dB gain |
Bits 5 & 6 | Ducker dB gain adjustment | -6 dB ducking |
Bits 7 & 8 | AGC and Noise Gate Settings | AGC FULL, Noise Gate OFF |
OPTIONS
Bit 1 | Bit 2 | Bit 3 | Bit 4 | Bit 5 | Bit 6 | Bit 7 | Bit 8 | |
|---|---|---|---|---|---|---|---|---|
OPTIONS | ON | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
Bits | Setting | Value |
|---|---|---|
Bits 1 & 2 | DDEQ configuration | Dynamic EQ enabled |
Bits 3 & 4 | Auto-Answer configuration | OFF |
Bit 5 | Send gain to phone | OFF |
Bit 6 | Hx2 internal mix-minus enable | OFF |
Bit 7 | Feedback Reduction enabled | OFF |
Bit 8 | Reserved | N/A |
INTERNAL
Bit 1 | Bit 2 | Bit 3 | Bit 4 | Bit 5 | Bit 6 | Bit 7 | Bit 8 | |
|---|---|---|---|---|---|---|---|---|
INTERNAL | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
Bits | Setting | Value |
|---|---|---|
Bits 1 - 4 | Telephone Network configuration | USA, Canada |
Bits 5 - 8 | Call Progress Tone Detection | USA dial tone |