SETTINGS | Function | |
|---|---|---|
Bit 1 | Bit 2 | EQ LO, Fixed dB Gain Adjustment |
OFF | OFF | 0 dB adjustment (factory default setting) |
OFF | ON | +2 dB adjustment |
ON | OFF | +4 dB adjustment |
ON | ON | +6 dB adjustment |
Bit 3 | Bit 4 | EQ HI, Fixed dB Gain Adjustment |
OFF | OFF | 0 dB adjustment (factory default setting) |
OFF | ON | +2 dB adjustment |
ON | OFF | +4 dB adjustment |
ON | ON | +6 dB adjustment |
Bit 5 | Bit 6 | Ducker dB Gain Adjustment |
OFF | OFF | Full Duplex (no attenuation) |
OFF | ON | -6 dB attenuation (factory default setting) |
ON | OFF | -12 dB attenuation |
ON | ON | Half Duplex |
Bit 7 | Bit 8 | AGC and Noise Gate Settings |
OFF | OFF | Phone AGC = OFF, Noise Gate = OFF |
OFF | ON | Phone AGC = 1/2 Full, Noise Gate = OFF |
ON | OFF | Phone AGC = Full, Noise Gate = OFF (factory default setting) |
ON | ON | Phone AGC = Full, Noise Gate = Normal |
OPTIONS | Function | |
|---|---|---|
Bit 1 | Bit 2 | DDEQ Configuration |
OFF | OFF | DDEQ = OFF |
OFF | ON | Fixed EQ (Use SETTING Bits 1-4 to set levels) |
ON | OFF | Adaptive EQ (factory default setting) |
ON | ON | Adaptive + Fixed EQ (Use SETTING Bits 1-4 to set fixed levels) |
Bit 3 | Bit 4 | Auto-Answer Configuration |
OFF | OFF | Auto-Answer = OFF (factory default setting) |
OFF | ON | Auto-Answer = ON, Auto-Answer after first ring |
ON | OFF | Auto-Answer = ON, Auto-Answer after third ring |
ON | ON | Auto-Answer = ON, Auto-Answer after eighth ring |
Bit 5 | Send Additional Gain to Caller | |
OFF | No additional gain applied (factory default setting) | |
ON | +3 dB additional gain applied | |
Bit 6 | Hx2 Internal Mix-Minus Enable | |
OFF | Disabled, Independent Mode (factory default setting) | |
ON | Enabled, Coupled Mode | |
Bit 7 | Feedback Reduction Enable | |
OFF | Acoustic Echo Canceller disabled (factory default setting) | |
ON | Acoustic Echo Canceller enabled | |
Bit 8 | Reserved | |
OFF | Reserved for future use (default factory setting) | |
ON | Not recommended |