Scope
This document applies to an Axia StudioCore and covers the following part numbers.
2001-00633-000: Axia StudioCore
2001-00634-000: Axia StudioCore Dual PSU
2001-00635-000: Axia StudioCore + CAN
2001-00636-000: Axia StudioCore + CAN Dual PSU
StudioEdge and StudioCore use the same chassis; however, StudioCore has a second DSP for the console engine that is not included on StudioEdge devices The Secondary / WAN port is only availble to units badged as StudioCore on the front panel
or on the model ID sticker on the back.
The specific port referred to in this document is labeled Secondary / WAN under the DSP Engine heading in the cluster of network ports located at the bottom right of the rear panel.
Description
This Secondary / WAN port is designed as an additional connection to Studio Core's “Console” (or DSP). It can be used for configuration, programming, and CoreSoft access that is not on the multicast network, such as a business network that may have access to the Internet or a corporate VPN.
No multicast audio can be contributed over this connection, but it can be used by the “LISTEN” options available to the Monitor and Headphone sections of CoreSoft. 
Configuration
The Secondary / WAN port is unconfigured by default and can be found under the StudioCore webUI's Network Setup options.
The WAN IP Address and main IP Address should be differnet subnets.
There is only ONE Gateway
There is no DNS
Do not put the SAME IP address in BOTH fields.