Step 1: Obtain the Password Reset Request Code
On the Omnia.12 front panel:
Navigate to the Local Password Reset screen.
Locate the Request Code displayed on the screen.
Record the following information:
Product name
Request Code
Serial Number
Username requiring the password reset
The request code is unique to the unit and is required by Telos Alliance Technical Support to generate the corresponding reset code.
.png?sv=2026-02-06&spr=https&st=2026-11-18T18%3A52%3A04Z&se=2026-11-18T19%3A03%3A04Z&sr=b&sp=r&sig=ICfVl8ATDfKEYFFdcroDd0tRQ884B3E0ZRQH%2FzhtehI%3D)
Step 2: Contact Telos Alliance Technical Support
Send the information collected in Step 1 to:
support@telosalliance.com or call 217-241-7225
Include the product serial number, request code, and username requiring the password reset.
Technical Support will use this information to generate a reset code for the unit.
Important: Request Code Expiration
Warning
The request code is valid for approximately one hour after generation.
If more than one hour has passed, a new request code may be required.
The front-panel display may not automatically refresh an expired request code if the reset screen has remained open. If necessary, exit the reset screen and reopen it to obtain a current request code.
Step 3: Enter the Reset Code on the Omnia.12
Once Telos Alliance Technical Support has provided the reset code, return to the Local Password Reset screen on the Omnia.12.
Select Reset Password.
Enter the following information:
Field | Information |
|---|---|
User Name | The username provided to Technical Support |
Reset Code | The code generated by Technical Support |
New Password | Your desired new password |
Confirm Password | Re-enter the new password |
Select Reset Password to complete the procedure.
.png?sv=2026-02-06&spr=https&st=2026-11-18T18%3A52%3A04Z&se=2026-11-18T19%3A03%3A04Z&sr=b&sp=r&sig=KBa1pQyRX3t%2FhIfsxJN3HFGN5wX5z6cDlWETCwHUDFs%3D)
Step 4: Verify the New Password
After the password has been reset:
Open a web browser.
Navigate to the IP address of the Omnia.12.
Enter the username and newly configured password.
Confirm that you can successfully access the unit.
Once the password has been updated, local access to the Omnia.12 is available without requiring an active internet connection.