Common 3rd Party GPIO Devices

The tabs below contain various diagrams to assist with interfacing to Axia GPIO ports

Diagrams are provided without warranty. If you spot any errors or concerns please let us know

XDS Pro Relays

Comrex Multirack Closures

Comrex Briclink II Closures

Henry Mike Alert

Wheatstone Blade 4 LIO

XDS Relay's to xNode GPI's

_Source:_{https://atx.com/wp-content/uploads/R830001-2106_XDS-PROnS_RevA_UserGuide.pdf}

Comrex Multirack CC Outputs to xNode GPI's

xNode GPO's to Comrex Multirack CC Inputs

Comrex Multirack CC Outputs to xNode GPI's
xNode GPO's to Comrex Multirack CC Inputs

_Source:_{https://www.comrex.com/wp-content/uploads/2019/11/ACCESS-MultiRack-Manual-English.pdf}

xNode GPO's to Henry Mike Alert

The above example will require Axia Pathfinder CorePro to combine Axia console Mic fader tally outputs to a single Axia GPO port.

Axia Channel GPIO to xNode GPO ports to Henry Mike Alert

The preceding illustration is beneficial when Axia Pathfinder CorePro is unavailable. The two Axia GPIO Ports depicted in the diagram will correspond to the Livewire channel numbers for the two microphone sources. Once those Livewire channels are assigned to physical faders on the Axia console, the Fader GPIO will be available on the GPIO port. You can easily relocate the microphone sources to various faders without needing to reassign the Livewire channel configurations of the xNode Port. Axia GPIO tracks the Livewire channel rather than the physical fader.

_Source:_{https://henryeng.com/pdf_MANUALS/MIKEALRT.pdf}

xNode GPO's to Blade LIO’s

Blade LIO’s to xNode GPI’s

_Source:_{https://wheatstone.app.box.com/v/Blade4Manual}

Comrex Briclink II CC Outputs to xNode GPI's

xNode GPO's to Comrex Briclink II CC Inputs

Comrex Briclink II CC Outputs to xNode GPI's
xNode GPO's to Briclink II CC Inputs

_Source:_{https://www.comrex.com/downloads/firmware/BRIC-Link%20II/BRIC-Link%20II%20Manual.pdf}

Wiring Omnia MPX Node GPIO to Axia GPIO