Discovery

The next step requires a web browser on a PC connected to either the office or Livewire network.

• If your computer is connected to the office network, open your browser and enter the IP address you assigned to the WAN port into the URL bar

• If your PC is connected to the Livewire network, open your browser and enter the IP you assigned to the Livewire port into the URL bar.

• An authentication window will appear. Type the following values: Username = Admin Password = Admin

• Select Sign In to load the Pathfinder Core PRO control panel

• From the links in the left-hand navigation bar, click Configuration under the System heading

• Next to Livewire Endpoint Discovery, click Start

Now would be a good time to grab a cup of coffee while the system evaluates the network, discovers devices, and builds your primary audio and GPIO routers.

While the Discovery is running, the system will continue to look for new devices. There is no message indicating completion, but if you click the Devices link in the navigation bar, you should see Devices populating the Devices list.

Congratulations! Your Pathfinder Core PRO is now configured and ready to start controlling your broadcasting world.