Home Page
Last updated
Last updated
The Telos Infinity INF-MP-16 configuration pages will be displayed after clicking on the “Manage” button under “Devices” on the Dashboard web page and entering the username and password when prompted. The username is “user” and the password is left blank.
The following homepage is launched:
A user field to describe the operational use of the Panel. In this example it's used in the Producers position.
Unique factory set number and cannot be changed.
User field to describe the physical location of the INF-MP-16 to assist with system diagnosis.
User configurable IP Address Number set by the user from the front Panel control.
User configurable IP Address Number configured on the GUI interface for the SMPTE ST2022-7 and Bonded Failover configuration.
Unique Media Access Control address set in the factory and cannot be changed.
User configurable Gateway IP Address Number set by the user from the front Panel control.
Unique number set by the factory to identify the INF-MP-16 and cannot be changed
Set by current software version running on the INF-MP-16. This is changed when software upgrades are loaded.
Describes the port state of the Precision Time Protocol interface running on the IP/Ethernet connection. This is either listening, slave or master depending on the configuration.
Describes the PTP master identifier. This is useful when multiple PTP master clocks are available in a BMC (Best Master Clock) redundant configuration.
Describes the time offset from the PTP master clock. This helps when configuring and diagnosing a system.
Internal temperature of the unit. To keep ambient noise as low as possible, the INF-MP-16 does not use any cooling fans.
Number of days, hours, minutes, and seconds the INF-MP-16 has been powered on for.
