xNode2 Manual

Prev Next
  • Updated on Oct 7, 2024
  • Published on Oct 3, 2024
Notices and Cautions Notices The installation and service instructions in this manual are for use by qualified personnel only. To avoid electric shock, do not perform any servicing other than that contained in the operating instructions unles...
  • Updated on Mar 25, 2026
  • Published on Sep 24, 2024
xNode2s are a family of half-rack AoIP nodes transitioning between Line level, AES3, Microphone, or GPIO into an Audio over Internet Protocol (AoIP). The xNode2 is the next in a series of successful node products from Telos Alliance. The xNode2 fami...
  • Updated on May 20, 2026
  • Published on Oct 3, 2024
The xNode2 is designed as an AoIP interface where baseband is converted to AoIP and vice versa. The target placement is in an equipment rack. The ½ RU device can be racked individually or joined with another to make a full RU assembly.  ...
  • Published on Apr 30, 2026
This chapter covers details that are common to all models within the xNode2 family. Rack mounting of a xNode2 is covered in chapter 2. Following chapters will cover details specific to each model.  Front Panel Interface The LCD screen and ...
  • Updated on May 7, 2025
The analog line model is composed of 4 stereo (8 mono-channel) inputs and outputs. The inputs and outputs can be wired with the DB25 connectors or the RJ45 connectors. The max input is 24dBu (clipping stage). The top DB25 connector is for ...
  • Updated on Apr 1, 2025
The digital AES3 model is composed of 4 AES3 inputs and outputs. The inputs and outputs can be wired with DB25 connectors or RJ45 connectors. The top DB25 connector is for inputs, while the bottom DB25 is for outputs. The top row of RJ45 is for ...
  • Updated on Jun 19, 2025
The Microphone model is composed of 4 Mono Microphone or line level inputs and 4 stereo line level outputs. The inputs and outputs can be wired with the DB25 connectors or the RJ45 connectors. The top DB25 connector is for the inputs while the b...
  • Updated on Feb 25, 2025
The mixed signal xNode2 has one microphone input, 3 line level stereo analog inputs, 1 AES3 input, 3 line level stereo analog outputs, 1 AES3 output, and 2 GPIO ports (5GPI/5GPO per port). Power to the model is either with an IEC-C13 or a...
  • Updated on Oct 7, 2024
The GPIO model is composed of 6 DA15 GPIO ports. Each port contains 5 GPIs (opto isolated inputs) and 5 GPOs (solid state relays). Each port is capable of driving a combined current of 100mA . Each GPI pin should be limited to 20mA of current. ...
  • Updated on Oct 7, 2024
The following logic tables come from Axia consoles. Axia consoles have profiles for sources  which define many things and one of those properties are GPIO controls. Each table is titled by the source profile type. The functionality is fixed an...
  • Updated on Apr 18, 2025
Microphone Preamplifiers Source Impedance: 150 Ohms Input Impedance: 4k Ohms minimum, balanced Input type: Line or Microphone Microphone PreAmp Gain: Adjustable, 14 dB to 68 dB Phantom power: +48VDC, switchable Analog Line Inputs ...