Specifications

I/O

SDI I/O

• Two auto-sensing 3Gb/s HD/SD-SDI (SMPTE ST425/292M/259M) inputs and two outputs via 75 Ohm BNC female connectors, internally terminated; video formats up to 1081i/60/59.94/50Hz

AES67 I/O

• 16-channels of bi-directional AES67 I/O in support of SMPTE ST 2110-30 workflows

Latency (V1.2.006 Software)

• 121ms with input and output SRCs disabled

• 127ms with input and output SRCs enabled

Clock Reference

• 48kHz reference via SDI, AES-3, PTP v2, or internal clock

Sample Rate/Resolution/Frequency Response

• 48kHz, 24-bit, 20Hz – 20kHz

Ethernet

• Two Gigabit RJ-45 connections, one each for AES67 and Control

Parallel GPI/O Control Port

• Future feature; 15-pin female D connector, 0-5V TTL levels; 5 inputs, 5 outputs

Front Panel Controls and Indicators

• 5-key navigation cluster

• Graphical color LCD display

• LED status indicators for each power supply, status, and reference

Power

• Dual internal redundant auto-ranging power supplies, each rated at 100-264VAC, 50/60Hz, 40 Watts maximum

Dimensions and Weight

• 19”W x 9”D x 1.75” H (approximately 48.2 x 22.0 x 4.5 cm)

• Net weight approximately 9.0 pounds (4.08kg)

• Shipping weight approximately 12.0 pounds (5.44kg)

Environmental

• Operating temperature 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit)

• Non-operating temperature -20 to 70 degrees Celsius (-4 to 158 degrees Fahrenheit)

Intended Location

• Telecommunications center or dedicated computer/machine room

Regulatory

• North America – FCC and CE tested and compliant with UL-approved power supplies

• Europe – Complies with European Union Directive 2002/95/EC on the restriction of use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended by Commission Decisions 2005/618/EC, 2005/717/EC, 2005/747/EC (RoHS directive), and WEEE

Warranty

• Standard Telos Alliance 2-year limited parts and labo