Scope
This document applies to Axia Quasar running versions 3.1 or higher.
Please click here if you need instructions and files to update to 3.1
Description
Version 3.1 of Quasar console software added the abiliy to lock the master touch screen (MTS) for cleaning purposes.
Caution
When accessing the lock function, a number of other options can also be changed. Take care to only lock the screen as needed and not change other conole settings like it’s IP address.
Locking the screen
The lock screen option is available by accessing the Setup Options normally not required for operation; therefore, it is hidden.
To access the System Setup page on the Master Touchscreen Module, you need to push and hold the "Monitor Options" key (labeled "MON OPT" and located between the two Control Room volume pots) for 5 seconds.
The LOCK TOUCH SCREEN button allows you to lock the touch sensor on the display, for cleaning while the console is on the air. After locking the touchscreen, a semi-transparent overlay is applied to the GUI, with a message indicating how to remove the lock.
The lock can be removed by pressing the leftmost and rightmost encoders below the screen at the same time.
