Telos VX Ent & Prime+ Help Documents

Prev Next
  • Published on Dec 19, 2024
Scope How to set up an external indicator for when a line is ringing in a VX studio. Notice: The VX Engine does not have any physical GPIO / parallel ports built in. In order to create a physical closure, you'll need an available port on a GPIO...
  • Updated on Feb 12, 2025
  • Published on Dec 19, 2024
Scope This article covers software update instructions and release notes for the Telos VX Enterprise and Prime+ VoIP phone systems. Specifically; 2001-00425 - VX Enterprise 2001-00510 - VX Prime+ VX Enterprise and Prime+ are deliv...
  • Published on Dec 19, 2024
Scope Even though the process is identical, there are different installers for VX Enterprise and VX Prime+. This update procedure applies only to those two products. Do not attempt to install this update on any other products. This update covers t...
  • Published on Dec 31, 2024
Scope This procedure applies only to VX Enterprise and VX Prime+ units and does not include Legacy VX and VX Prime (fanless engine). This procedure may involve 3rd party software. Even though the software we mention is free and available, Telos A...
  • Published on Dec 31, 2024
The QOS options on VX Enterprise and VX Prime+ are set through a configuration file named qos.cfg . This file is found at this location: /etc/local/telos_vx/qos.cfg . The general format of the file is similar to that of other configuration files....
  • Published on Dec 31, 2024
Scope This Corrective Field Action (CFA) impacts the following products: 2001-00305 - Zephyr iPort (FANLESS) MPEG Gateway 2001-00378 - Zephyr iPort MPEG Gateway + Content Delay 2001-00306 - Axia Studio Mix Engine (FANLESS) 2001-...
  • Updated on Feb 5, 2025
  • Published on Dec 31, 2024
Scope This article covers software update instructions and release notes for the Telos VX Enterprise and Prime+ VoIP phone systems. Specifically; 2001-00425 - VX Enterprise 2001-00510 - VX Prime+ VX Enterprise and Prime+ are deliv...
  • Published on Dec 31, 2024
Scope It is important to understand that a Telos VX Enterprise, VX Prime, or VX Prime+ product requires additional services and infrastructure in place to operate as intended. These requirements amount to a SIP provider, a compatible Livewire envir...
  • Updated on Feb 5, 2025
  • Published on Dec 31, 2024
Scope This document covers version changes to VX Enterprise and VX Prime+ VoIP phone systems. Latest update : November 11, 2021 Please note that the software versions described here could be in the beta or stable stages of the release...
  • Published on Dec 31, 2024
Scope This procedure applies only to VX Enterprise and VX Prime Plus units and does not include Legacy VX and VX Prime (fanless engine). This procedure involves 3rd party software. Even though the software we mention is free and available, Telos ...
  • Published on Dec 31, 2024
Summary When attempting to dial out from a VSet, Axia console phone module, drop-in console controller, or call screening software: I hear no audio and see a "dialing" icon on the VSet, Axia console phone module, drop-in console controller, or c...
  • Updated on Feb 5, 2025
  • Published on Dec 31, 2024
VX software version 1.3.0 or above is required to change VLAN tag. All passwords are unique to each unit and based on the Sytem ID on the status page. Contact Telos if you require the passwword for your unit. If you do not already have it insta...
  • Updated on Feb 5, 2025
  • Published on Dec 31, 2024
VX Prime+ v1.1.0.3 Update Instructions and Release Notes Instructions: Download the update file and save it to a memorable location. Download the v1.1.0.3 update file here . Navigate to the VX Enterprise's Firmware page and click the BR...
  • Updated on Feb 5, 2025
  • Published on Dec 31, 2024
VX Enterprise v1.1.0.3 Update Instructions and Release Notes Instructions: Download the update file and save it to a memorable location. Download the v1.1.0.3update file here. Navigate to the VX Enterprise's Firmware page and click the...
  • Updated on Feb 5, 2025
  • Published on Dec 31, 2024
Scope The qos.cfg file is an advanced method for modifying the following parameters: IEEE 802.1p priority code point IEEE 802.1Q VLAN tag IP Time to Live (TTL) value IP DiffServ code point (DSCP) Set IP Don't Frag (DF) bit (Standard ...
  • Updated on Feb 5, 2025
  • Published on Dec 31, 2024
Scope This applies to VX Enterprise and VX Prime+. This procedure can be used when the web UI password has been lost and a full factory reset from the front panel is not ideal, as all settings and licenses are lost when a factory reset is completed...
  • Updated on Feb 5, 2025
  • Published on Dec 31, 2024
Lots of good information in this link about analyzing SIP calls in WireShark. This is not a Telos article, and the accuracy of the information has not been vetted. It is provided for you as a helpful reference. https://support.yeastar.com/hc/e...
  • Published on Dec 31, 2024
Scope Telos VX Enterprise, VX Prime Plus and VXs provide advanced stream statistics to aid in troubleshooting AOIP and VOIP streams being sent and received This helpdoc will review how the stream stats are presented, and how they can be used for m...