Factory Default Settings

The following are the Factory Default Settings for the SETTINGS, OPTIONS, and Internal Telephone Network/Call Progress Tone Detection (CPTD) DIP switches. They will work in most cases, but should be considered a “starting point."

SETTINGS

	Bit 1	Bit 2	Bit 3	Bit 4	Bit 5	Bit 6	Bit 7	Bit 8
SETTINGS	OFF	OFF	OFF	OFF	OFF	ON	ON	OFF

Bits	Setting	Value
Bits 1 & 2	EQ LO, fixed dB gain adjustment	0 dB gain
Bits 3 & 4	EQ HI, fixed dB gain adjustment	0 dB gain
Bits 5 & 6	Ducker dB gain adjustment	-6 dB ducking
Bits 7 & 8	AGC and Noise Gate Settings	AGC FULL, Noise Gate OFF

OPTIONS

	Bit 1	Bit 2	Bit 3	Bit 4	Bit 5	Bit 6	Bit 7	Bit 8
OPTIONS	ON	OFF	OFF	OFF	OFF	OFF	OFF	OFF

Bits	Setting	Value
Bits 1 & 2	DDEQ configuration	Dynamic EQ enabled
Bits 3 & 4	Auto-Answer configuration	OFF
Bit 5	Send gain to phone	OFF
Bit 6	Hx2 internal mix-minus enable	OFF
Bit 7	Feedback Reduction enabled	OFF
Bit 8	Reserved	N/A

INTERNAL

	Bit 1	Bit 2	Bit 3	Bit 4	Bit 5	Bit 6	Bit 7	Bit 8
INTERNAL	OFF	OFF	OFF	OFF	OFF	OFF	OFF	OFF

Bits	Setting	Value
Bits 1 - 4	Telephone Network configuration	USA, Canada
Bits 5 - 8	Call Progress Tone Detection	USA dial tone