Quasar Engine Audio Output Configuration
PreviousQuasar Engine Installation and Network ConfigurationNextCreating and Configuring Input Sources
Last updated
Last updated
Quasar Engine audio setup begins with configuring the audio outputs.
Using a PC connected to your studio network, enter the IP address of the Quasar Surface to display the web GUI.
From the Configuration menu, select Program & Monitor Outs.
Enter the channel numbers you planned for the Quasar Engine (Livewire Sources) outputs.
Enable the streams you need to be active on the Engine.
Click the "Apply" button.
Note - We recommend adopting a numbering scheme for Channel IDs that uses the first two or three digits of the last octet of the Quasar Engine IP address. In the example above, the Engine has an IP address of 192.168.2.101, and the Channel Numbers are 1011, 1012, 1013, etc. This will make it easier to identify the channels when browsing a large network.
In order to hear audio through your speakers and headphones, assign the CR Monitor and CR Headphone streams to the Destinations (outputs) of the xNode connected to the speakers and headphone amplifier.
